Orbit Drip Irrigation Manifolds

Orbit   8 -Port NPT Adjustable Flow Control Irrigation Manifold with Filter

Drip manifolds are engineered to take one or more lines of 1/4-inch “blank” (meaning no emitters are pre-installed) or emitter tubing out to each plant or area of the garden. They are available in both full-flow and flow-control versions. Full flow manifolds are acceptable for longer runs of emitter tubing or where each emitter is pressure compensating. Flow control manifolds are appropriate for micro-sprinkler, micro-bubblers and non-pressure-compensating drip emitters. The most common installation method is to mount the drip manifold on a 1/2-inch male pipe thread (MPT) PVC riser, unthread the black cap from a 1/4-inch barb, and then slip 1/4-inch drip tubing over the barb. The black cap has 10-32 threads and can serve as a cap for multi-stream inline emitters. The green port elbows rotate for optimum positioning. Compatible with 1/-inch drip tubing from Orbit, Hydro-Rain, and other major brands. Recommended operating pressure is 25-30 PSI. For outdoor irrigation use with cold water only.

Orbit   4 -Port NPT Adjustable Flow Control Irrigation Manifold with Filter

Drip manifolds attach to the top of 1/2-inch male pipe thread (MPT) PVC risers of various lengths and create a simple way to carry water via 1/4-inch drip tubing to trees, shrubs, perennials, or annuals in beds or containers. This makes them excellent as a direct replacement for existing spray heads. Drip manifolds come in a variety of port configurations from one to eight lines, and there is even a version which allows you to run four drip lines and place a shrub head adapter on top of it for unique situations which require both spray and drip. Flow control versions are excellent choices for non-pressure compensating emitters and micro-sprinklers, while non-flow control versions are appropriate for pressure compensating emitters and emitter tubing. The 1/4-inch barbs on the manifold rotate 360 degrees for ease of insertion and positioning of 1/4-inch drip tubing. On non-culinary secondary water install a minimum 120-mesh filter or pressure regulator to prevent debris from plugging emitters and micro-sprinklers. For outdoor irrigation use with cold water only.

Orbit   2 -Port NPT Irrigation Manifold with Filter

Drip manifolds are engineered to take one or more lines of 1/4-inch “blank” (meaning no emitters are pre-installed) or emitter tubing out to each plant or area of the garden. They are available in both full-flow and flow-control versions. Full flow manifolds are acceptable for longer runs of emitter tubing or where each emitter is pressure compensating. Flow control manifolds are appropriate for micro-sprinkler, micro-bubblers and non-pressure-compensating drip emitters. The most common installation method is to mount the drip manifold on a 1/2-inch male pipe thread (MPT) PVC riser, unthread the black cap from a 1/4-inch barb, and then slip 1/4-inch drip tubing over the barb. The black cap has 10-32 threads and can serve as a cap for multi-stream inline emitters. The green port elbows rotate for optimum positioning. Compatible with 1/-inch drip tubing from Orbit, Hydro-Rain, and other major brands. Recommended operating pressure is 25-30 PSI. For outdoor irrigation use with cold water only.

Orbit   4 -Port NPT Adjustable Flow Control Irrigation Manifold with Filter

Drip manifolds are engineered to take one or more lines of 1/4-inch “blank” (meaning no emitters are pre-installed) or emitter tubing out to each plant or area of the garden. They are available in both full-flow and flow-control versions. Full flow manifolds are acceptable for longer runs of emitter tubing or where each emitter is pressure compensating. Flow control manifolds are appropriate for micro-sprinkler, micro-bubblers and non-pressure-compensating drip emitters. The most common installation method is to mount the drip manifold on a 1/2-inch male pipe thread (MPT) PVC riser, unthread the black cap from a 1/4-inch barb, and then slip 1/4-inch drip tubing over the barb. The black cap has 10-32 threads and can serve as a cap for multi-stream inline emitters. The green port elbows rotate for optimum positioning. Compatible with 1/-inch drip tubing from Orbit, Hydro-Rain, and other major brands. Recommended operating pressure is 25-30 PSI. For outdoor irrigation use with cold water only.

Orbit   2 -Port Combination Irrigation Manifold

Drip-Lock Fittings connect 1/2-inch drip distribution or emitter tubing to a sprinkler line, hose faucet or valve. They fit 1/2-inch sizes ranging from .630-inch to .700-inch. Stainless steel teeth grip the pipe tightly and a special O-ring creates a watertight seal while still allowing for rotation of the fitting after insertion A built-in removal collar allows for easy reconfiguration and reuse of the fittings, including end-of-season disassembly for compact winter storage. The Drip-Lock manifold is an especially convenient way to connect 1/2-inch distribution tubing to 1/4-inch distribution tubing which can then go to each individual plant. For outdoor irrigation use with cold water only.

Rain Bird   9 -Port Pipe Thread Adjustable Flow Control Irrigation Manifold Built Into The Product

Providing full adjustability of each port, this drip irrigation manifold will allow you to customize flow from 0 to 20 GPH for individual plants, improving root development and reducing plant stress. The manifold has 9 ports which accept standard 1/4 in. drip tubing. Each port adjusts with a side lever to increase, decrease or shut off flow. The manifold mounts to a standard 1/2” MPT riser.

Orbit   1 -Port Barbed Irrigation Manifold with Filter

Drip manifolds are engineered to take one or more lines of 1/4-inch “blank” (meaning no emitters are pre-installed) or emitter tubing out to each plant or area of the garden. They are available in both full-flow and flow-control versions. Full flow manifolds are acceptable for longer runs of emitter tubing or where each emitter is pressure compensating. Flow control manifolds are appropriate for micro-sprinkler, micro-bubblers and non-pressure-compensating drip emitters. The most common installation method is to mount the drip manifold on a 1/2-inch male pipe thread (MPT) PVC riser, unthread the black cap from a 1/4-inch barb, and then slip 1/4-inch drip tubing over the barb. The black cap has 10-32 threads and can serve as a cap for multi-stream inline emitters. The green port elbows rotate for optimum positioning. Compatible with 1/-inch drip tubing from Orbit, Hydro-Rain, and other major brands. Recommended operating pressure is 25-30 PSI. For outdoor irrigation use with cold water only.

Raindrip   1 -Port Hose Thread Irrigation Manifold with Filter

To make your underground sprinkler system also function as a low-flow drip irrigation system, this is the adapter you need. The 1/2 in. FPT X 1/4 in. Sprinkler Riser to Drip Tubing Conversion Adapter threads onto the sprinkler riser and outlets through the sprinkler head on top as well as through the 1/4 in. supply tubing or dripline inserted into the side compression ring. A filter washer inside the adapter ensures a watertight fit and screens out particles before they can clog the system. This adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together or to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Orbit   2 -Port Combination Irrigation Manifold with Filter

Drip manifolds attach to the top of 1/2-inch male pipe thread (MPT) PVC risers of various lengths and create a simple way to carry water via 1/4-inch drip tubing to trees, shrubs, perennials, or annuals in beds or containers. This makes them excellent as a direct replacement for existing spray heads. Drip manifolds come in a variety of port configurations from one to eight lines, and there is even a version which allows you to run four drip lines and place a shrub head adapter on top of it for unique situations which require both spray and drip. Flow control versions are excellent choices for non-pressure compensating emitters and micro-sprinklers, while non-flow control versions are appropriate for pressure compensating emitters and emitter tubing. The 1/4-inch barbs on the manifold rotate 360 degrees for ease of insertion and positioning of 1/4-inch drip tubing. On non-culinary secondary water install a minimum 120-mesh filter or pressure regulator to prevent debris from plugging emitters and micro-sprinklers. For outdoor irrigation use with cold water only.

Orbit   4 -Port Combination Irrigation Manifold with Filter

Drip manifolds attach to the top of 1/2-inch male pipe thread (MPT) PVC risers of various lengths and create a simple way to carry water via 1/4-inch drip tubing to trees, shrubs, perennials, or annuals in beds or containers. This makes them excellent as a direct replacement for existing spray heads. Drip manifolds come in a variety of port configurations from one to eight lines, and there is even a version which allows you to run four drip lines and place a shrub head adapter on top of it for unique situations which require both spray and drip. Flow control versions are excellent choices for non-pressure compensating emitters and micro-sprinklers, while non-flow control versions are appropriate for pressure compensating emitters and emitter tubing. The 1/4-inch barbs on the manifold rotate 360 degrees for ease of insertion and positioning of 1/4-inch drip tubing. On non-culinary secondary water install a minimum 120-mesh filter or pressure regulator to prevent debris from plugging emitters and micro-sprinklers. For outdoor irrigation use with cold water only.

Rain Bird   6 -Port Barbed Irrigation Manifold

Rain Bird MANIFRE6S Drip Irrigation 6-Port Manifold with Unregulated Free Flow. Use this 6-port female pipe threaded professional grade manifold to connect 1/4" Drip irrigation tubing directly to a standard 1/2" male pipe threaded riser. Easily add Drip irrigation watering to plants in your garden, landscaped areas or containers. Barbed outlets securely hold all brands of 1/4" Drip tubing for leak-proof connection to drippers/emitters, bubblers, micro sprays and emitter tubing. Attach 1/4" Drip distribution tubing to each barbed outlet and extend out to water plants with one or more Drip watering devices. Self-flushing action minimizes clogging. This is an un-regulated free flow design for use only with a pressure regulated water source. Constructed of highly durable UV and chemical-resistant materials to assure long life. Rain Bird “The Intelligent Use of Water”.

Rain Bird   1 -Port Barbed Irrigation Manifold

Adapter for quick connection of 1/4 in. drip irrigation tubing to a standard 1/2 in. riser. Non-regulated, free flow. Use only on pressure regulated drip systems.

Rain Bird   4 -Port Barbed Irrigation Manifold

Easily add supplemental watering to individual plants in your garden, landscaped area or containers. Bottom inlet attaches to standard 1/2 in. threaded riser. 4 unregulated, barbed ports accept 1/4 in. drip irrigation poly tubing for connection of drippers, bubblers, micro sprays and emitter tubing. Use 1 to 4 ports, leaving unused ports capped.

Rain Bird   1/2-in x 500-ft Drip Irrigation Distribution Tubing

1/2 in. Blank (Distribution) Tubing is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Drip Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings or drippers.

Raindrip   Drip Irrigation Patio Kit

Save time and money when you switch from watering plants by hand to effortless drip irrigation. The Automatic Watering Kit with Timer for Containers and Hanging Baskets has everything you need to water up to 20 individual plants with precision watering for optimal growth and health. The #1 bestseller includes a timer to automate watering; 75 ft. of 1/4 in. supply tubing and adapter to connect to a faucet; 201/2 GPH pressure-compensating (PC) drippers, 20 stakes, 10 clamps, plus barbed couplings, elbows, tees, and end plug. Set, connect, and water—the easy 3-step installation gets you drip-ready in minutes. Drip irrigation systems are easy to customize, install, and operate. Raindrip Automatic Watering Kits contain all the components you need to set up your own drip irrigation system, and are ideal for any level gardener. The comprehensive kits can be installed in just three steps. Components work well with other Raindrip products, making it simple to expand your drip system to fit your landscape needs. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.