Agrifim Drip Irrigation

Rain Bird   1/2-in x 500-ft Drip Irrigation Distribution Tubing

1/2 in. Blank (Distribution) Tubing is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Drip Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings or drippers.

Raindrip   Drip Irrigation Patio Kit

Save time and money when you switch from watering plants by hand to effortless drip irrigation. The Automatic Watering Kit with Timer for Containers and Hanging Baskets has everything you need to water up to 20 individual plants with precision watering for optimal growth and health. The #1 bestseller includes a timer to automate watering; 75 ft. of 1/4 in. supply tubing and adapter to connect to a faucet; 201/2 GPH pressure-compensating (PC) drippers, 20 stakes, 10 clamps, plus barbed couplings, elbows, tees, and end plug. Set, connect, and water—the easy 3-step installation gets you drip-ready in minutes. Drip irrigation systems are easy to customize, install, and operate. Raindrip Automatic Watering Kits contain all the components you need to set up your own drip irrigation system, and are ideal for any level gardener. The comprehensive kits can be installed in just three steps. Components work well with other Raindrip products, making it simple to expand your drip system to fit your landscape needs. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Orbit   Drip Irrigation Micro Stake 10 -Pack

Drip tubing anchor stakes are engineered to securely hold 1/4-inch or 1/2-inch tubing in place. There are two versions which serve the same function. The purpose-built plastic anchor stake has a loop which secures over the tubing and barbs on the stake itself which anchor it firmly in the soil. The wire loop anchor stakes are very similar to landscape fabric stakes and are best used for firmer soils which provide some grip on the wire. While the poly stake provides a more secure hold in a wider variety of soils, the wire loop anchor stakes provide the dual benefit of holding drip tubing and landscape fabric in place. Both are reusable and provide years of reliable service. Drip tubing straps (sold separately) are an excellent way to anchor tubing to walls, railings and other surfaces.

Raindrip   1/4-in x 100-ft Drip Irrigation Distribution Tubing

Supply water directly to your plants with 1/4 in. distribution tubing. Attach tubing to the main line to create a feeder line that delivers water to a low-flow, drip-watering device, or use as a main line in a smaller drip system. The quarter-inch tubing, also known as micro tubing or spaghetti tubing, has an outside diameter (OD) of 0.250 in. and internal diameter (ID) of 0.170 in. While other manufacturers use blended recycled material to construct their entire tubing, Raindrip poly tubing is engineered in layers for durability using 100% virgin content for its outer and inner layers, with a middle layer of recycled content.Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, the supply tubing transports water to the area to be irrigated. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Rain Bird   1/2-in x 100-ft Drip Irrigation Distribution Tubing

1/2 in. Blank (Distribution) Tubing is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Drip Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings or drippers.

Rain Bird   1/2-in x 100-ft Drip Irrigation Emitter Tubing

Designed for multi-season use, this rugged Rain Bird 1/2 in. emitter tubing provides dependable, uniform watering of vegetable plants, ground cover, flowers and other closely spaced plants. With 0.9 GPH (gallons per hour) built-in emitters spaced every 18 in., the tubing waters evenly from beginning to end of its layout in your planting area. Just cut, place and connect in any arrangement using Rain Bird 1/2 in. barbed or easy-fit compression fittings and stakes (purchased separately). The emitters are designed for clog-resistant flow. Other professional grade quality features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage.

Orbit   1/2-in x 100-ft Drip Irrigation Distribution Tubing

Orbit’s 1/2-inch drip blank distribution tubing has a nominal outside diameter of 0.700 inch which is common in retail residential installations. Made of low-density polyethylene (LDPE), it is designed with flexible characteristics which make it suitable for a variety of landscape designs. Use 1/2-inch drip blank distribution tubing with Drip-Lock fittings to carry water from a drip valve or hose faucet to a zone of drip-watered plants. This tubing is “blank” which means it is a continuous run of tubing without any pre-installed emitters in it. Use a Drip Punch Tool to insert 1/4-inch barb drip fittings or emitters at points close to each plant. Since the outside diameter of 1/2-inch tubing may vary by manufacturer, we recommend using Orbit Universal Drip Fittings when connecting to non-Orbit drip systems. We also strongly recommend using a 2-in-1 filter and pressure regulator for all drip zones. For non-constant pressure outdoor irrigation use with cold water only.

Raindrip   Universal Plastic Drip Irrigation Coupling

"Build, repair, or expand your drip irrigation system with the Smart Loc™ Universal Coupling, the unique fitting that accommodates multiple tubing sizes. Works with 1/2 in., 5/8 in., and 0.710 in. supply tubing and dripline sizes to connect sections together or transition from one tubing size to another. Make easy connections with a twist—simply insert the barbed end into the tube, then twist the nut over the tubing end for a secure fit. Reusable fitting is made of acrylonitrile butadiene styrene (ABS). Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together, or attach tubing to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success."

Raindrip   Drip Irrigation Goof Plug 20 -Pack

Got a hole in tubing you don’t want? Goof plugs to the rescue! These sturdy plugs eliminate the laborious task of removing, sizing, and replacing damaged tubing by sealing holes on the spot. Our goof plugs have different sized ends and are designed to plug holes small or large. Push them in by hand; a fitting inserter tool such as the 3-in-1 Hole Punch Tool or 4-in-1 Cut N’ Punch™ Tool will also do the trick. Works on 1/2 in., 5/8 in., and 0.710 in. tubing. The plugs come conveniently attached together and snap off when ready to use. Goof plugs are made of polypropylene (PP) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. Raindrip offers a variety of time-saving tools to make it easier to put together your drip irrigation system for stress-free assembly. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   1/4-In x 50-Feet Drip Irrigation Soaker Tubing

The porous 1/4 in. Soaker Tubing gently seeps water out of the entire line, moistening the soil around plants for complete root zone hydration. Easy to install—attach the tubing to a larger supply line using a 1/4 in. fitting or Clamp N Pierce® connector, and place tubing in the area to be irrigated. The flexible soaker tube is ideal for short runs on flat surfaces such as vegetable gardens and borders, and also great as a watering ring around small plants. With the non-pressure compensating soaker tubing, expect varying water flows based on length of tubing or landscape elevation, with higher flows closer to the water source. The soaker tubing is made of recycled rubber treated with UV inhibitors for durability. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, the soaker tubing evenly waters the root zone of your plants, keeping it moist with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   11 GPH Full-circle Drip Irrigation Multi-Stream Dripper Stake

Regulate the amount of water delivered to your plants with a twist of a knob using the Adjustable Flow Bubbler. Bubbler works from 0-40 PSI to discharge 0 to 11.7 GPH, and throw of up to 16 in. radius. Flow is adjusted by turning the head of the bubbler which acts as a dial. The 8-stream emitter releases water in a full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Emitter is assembled on a 5 in. stake, and a built-in 1/4 in. barbed inlet connects to 1/4 in. supply tubing. Bubbler is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With non-pressure compensating emitters, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow bubblers are easy to set up in drip systems, and can be used in place of several drippers. Raindrip offers an emitter for every watering need. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   11 GPH Full-Circle Drip Irrigation Micro Spray 10 -Pack

Regulate the amount of water delivered to your plants with a twist of a knob using the Adjustable Flow Bubbler. Bubbler discharges up to 11.7 GPH, with throw of up to 16 in. radius (at 15-50 PSI). Flow is adjusted by turning the head of the bubbler which acts as a dial. The 8-stream emitter releases water in a full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Emitter is assembled on a 5 in. stake, and a built-in 1/4 in. barbed inlet connects to 1/4 in. supply tubing. Bubbler is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With non-pressure compensating emitters, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow bubblers are easy to set up in drip systems, and can be used in place of several drippers. Raindrip offers an emitter for every watering need. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.