Flooring
2 results
- •Board compressive strength is 22 psi or 3000 lbs per sq ft load capacity with an R5 value, has less than 1.5% water absorption and 0.42 perms
- •Panel is acceptable for roof, floor and wall insulation in residential, agricultural, commercial and industrial construction
- •Raised square blocks and deep valleys with a laminated vapor barrier surface film on the bottom face allow for both water and air movement under the floor facilitating drying
4.5
- •Actual Measurements: 1/2-in thickness (12.7 mm) x 32-in width (813 mm) +- 0.094-in (2.4 mm) x 5-ft length (1524 mm) + 0.25-in (6.4 mm), providing ample coverage for larger projects
- •Lightweight tile backer designed to be placed between subfloor or studs and tile, helping to protect against moisture in areas with high humidity such as bathrooms, bathtubs, showers, countertops, backsplashes, and more
- •Mold-resistant and has an acrylic coating that stops moisture under ASTM D3273, eliminating need for an additional moisture barrier