Flooring
2 results
4.4
- •Board compressive strength is 22 psi or 3000 lbs per sq ft load capacity with an R5 value, has less than 1.5% water absorption and 0.42 perms
- •Panel is acceptable for roof, floor and wall insulation in residential, agricultural, commercial and industrial construction
- •Raised square blocks and deep valleys with a laminated vapor barrier surface film on the bottom face allow for both water and air movement under the floor facilitating drying
- •4 - in - 1 portable floor installation kit includes tapping block pull bar 40 pcs floor spacers and rubber mallet Tapping block has unique edge design for most floor types Push tongue and groove floors together for tight seams
- •Universal block suitable for tongue & groove or click - lock floors Put it on the floor tongue and tap to join planks Works with resilient vinyl laminate or hardwood flooring
- •Tapping block has 3 different thickness edges 1.5mm for 3.5 - 5.5mm floor 2.5mm for 6mm - 3/8in floor 3.5mm for 10 - 12mm floor Thinnest edge has inclined angle to prevent floor movement