Flooring
3 results
5.0
- •Cantilevering rail/cart system allows for 24-in ripping capacity - 18-in tile on diagonal
- •Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts
- •Dual water nozzles can be adjusted for optimal water placement, minimizing over-spray
4.0
- •Cut-line indicator, rigid frame, and stainless steel rollers provide cutting accuracy to within 1/32-in over 30-in cuts
- •37-in rip cut capacity (41-in with plunge) and 18-in cutting clearance left of blade allows users to rip 36-in x 36-in tile in half
- •8-1/2-in crosscut capacity is ideal for cutting 6-in sills and 8-in x 48-in planks at a 30% offset
- •Board compressive strength is 22 psi or 3000 lbs per sq ft load capacity with an R5 value, has less than 1.5% water absorption and 0.42 perms
- •Panel is acceptable for roof, floor and wall insulation in residential, agricultural, commercial and industrial construction
- •Raised square blocks and deep valleys with a laminated vapor barrier surface film on the bottom face allow for both water and air movement under the floor facilitating drying