Flooring
3 results
4.3
- •Our unique Ampex pipe R10 insulated panel kit contains 8 panels each – 3.375” x 2 ft x 4 ft – 64 sq ft total area
- •The panel design ensures that the tubing is completely encased in concrete and not pushed to the bottom of the panel through the use of bridge connectors and the larger contact area between the tubing and the concrete allows for efficient heat transfer
- •The nub height and film accommodates tube sizes from 3/8 in to 1 in O/D and protects the tubing from damage and dislocation when the panel is walked upon during construction; no staples and zip ties greatly reducing install time
- •Our unique Ampex pipe R16 - high density - snow melt insulated panel kit contains 5 panels each – 4.875” x 2 ft x 4 ft – 40 sq ft total area
- •The panel design ensures that the tubing is completely encased in concrete and not pushed to the bottom of the panel through the use of bridge connectors and the larger contact area between the tubing and the concrete allows for efficient heat transfer
- •Oversized 4-sided tongue and groove interlock system makes for quick, easy and secure installation unique patented design of the panel nubs will accept any certified radiant heating pipe sizes of 3/8 to 1 in
- •Board compressive strength is 22 psi or 3000 lbs per sq ft load capacity with an R5 value, has less than 1.5% water absorption and 0.42 perms
- •Panel is acceptable for roof, floor and wall insulation in residential, agricultural, commercial and industrial construction
- •Raised square blocks and deep valleys with a laminated vapor barrier surface film on the bottom face allow for both water and air movement under the floor facilitating drying