Marshalltown Hard Surface Flooring Tools

Project Source   Flooring 4-pc Installation kit

Laminate and wood flooring installation kit is ideal for vinyl, laminate and hardwood floor installations. The kit includes 16in rubber mallet, 48pc flooring wedge spacers, pro pull bar, and tapping block. The wedge spacers provide the correct expansion gap at the perimeter of the room, while the tapping block and pull bar help make the installation a tight fit. Non-marring and double faced mallet for use with tapping block and pull bar. Wide angle pull bar is designed to pull planks together in tight areas.

Brutus   Pro Installation kit

Install vinyl, laminate and engineered hardwood flooring with precision and confidence with the BRUTUS Pro Flooring Installation Kit. Developed by professionals for professionals and DIYers alike, this kit features a dual-faced mallet, tapping block, pull bar, and 30 expansion joint spacers that stay in place until you’re read to remove them. Reusable, easy to use and easy to transport.

Blue Hawk   4 -Pack Installation kit

The Blue Hawk universal installation kit is designed for laminate and wood floors. The installation kit will cover basic tools that are needed to install laminate and wood flooring, including a tapping block, pull bar and 30 expansion spacers. Other tools that could be used are tape measure, safety glasses, pencil, dead blow hammer, level, chisel, flooring cutter, jigsaw, undercut door jamb saw, cut-resistant gloves and a utility knife. Follow flooring manufacturer's installation instructions carefully.

Blue Hawk   Tapping block

Designed for laminate and wood floors, the Blue Hawk tapping block is designed to close gaps when installing laminate floors without damaging the flooring. To use place the small edge of the tapping block over the laminate flooring. Using a dead blow hammer, carefully tap on the block to close the gap between the two pieces of laminate flooring. Follow flooring manufacturer's installation instructions carefully.

Blue Hawk   48 -Pack Installation spacers

Blue hawk expansion gap spacers are used to create a gap between the laminate or wood flooring and the wall before installing a wall base or quarter round. Stackable wedge design allows gaps to be adjusted to desirable width. Follow flooring manufacturer's installation instructions carefully.

Bruce   10 -Pack Installation spacers

Splines are strips of wood, plywood, or other material inserted into matching grooves or plows, along the edges of two boards. The purpose is to reinforce and align the edges. Splines are strips of wood, plywood, or other material inserted into matching grooves or plows, along the edges of two boards. The purpose is to reinforce and align the edges. A spline can be used as a substitute for the tongue and groove.

CalFlor   Installation kit

VersaBlock™ is the all new versatile block with multiple flooring profiles and additional integrated features. The VersaBlock™ is equipped with 2 different edges making it suitable for flooring as thin as 3.5 mm or as thick as 12 mm or more! The pencil holes can be used for tracing against a wall, the knife notch is used for trimming the tongues off of planks, and the ruler measures up for a quick check during installation.

Powernail   Tapping block

This tapping block is made of heavy-duty UHMW plastic and is intended to aid in the installation of engineered flooring, lvp, hardwood and many other types of plank flooring.

CalFlor   Flooring pull bar

The CalFlor heavy duty professional pull bar was developed for the professional floor installer in mind. Designed to withstand a lifetime of installations, this pull bar has a heavy steel core and durable powder coated finish. Let this tool do the work for you. It boasts a robust angled head to give the perfect amount of leverage needed to pull any floor together and close gaps with less power behind each blow. Adding to the functionality this tool even has a pry bar end so it can be used for any aspect of your job, from demolition to install.

CalFlor   Mix2Match 6 Ounce(s) Multiple Multi-surface repair kit

Mix2Match Tile Fix™ Tile & Stone Repair Kit. Custom repairs for tile and stone flooring, backsplashes and countertops are now possible! You no longer need to settle for a similar bad color match from non-tin table fillers. Unlike other products, Tile Fix™ can be matched to virtually any ceramic tile, marble, concrete or stone surface, using 28 color formulas and step-by-step instructions. The kit even has tips for subtle tones & grain-matching to be matched on your repair! Each Tile Fix™ kit has enough product for multiple repairs and different projects around your home. The kit includes putty, 8 color tints, lacquer, graining cotton swab, brush, mixing spatula, bowl and board. Formulas ranging from browns, blues, and grays, to neutral creams and whites. Great for DIY and professionals.

Powernail   Powerjack 500 Push or Pull Floor Positioning Tool Flooring pull bar

The Powernail power jack 500 provides a convenient way of either pulling or pushing your flooring strips tightly into position with just one tool. You can screw the power jack in place to gain leverage against your flooring strips or use its unique drop down self adjusting jaw, and expand the jack, pulling your flooring into place for proper nailing. Its slim design and bent handle allows you to use the device under toe kicks and cabinets, ensuring tight flooring. The power jack 500 will work on most flooring thicknesses without damaging the flooring surface. This tool will save time and increase efficiencies by speeding up the entire floor laying process while holding the flooring tightly in place for hands free nailing. The power jack 500 is made in the USA and will help the do it yourself or professional install a better floor.

Powernail   Powerjack 100 Push or Pull Floor Positioning Tool Flooring pull bar

The powerjack model 100 is a ratcheting floor positioning tool that will help straighten and hold floor boards during installation. It is designed to pull tongue and groove flooring boards into place and hold them tightly for hands free nailing. This tool will save time and increase efficiencies by speeding up the entire floor laying process. Powerjack 100 will work on almost any thickness of flooring without damaging the flooring surface. It can be used next to the wall, at stud locations, under the toe kick at cabinet locations or mid floor. Thepowernail powerjack is made to assist the flooring pro and do it yourselfer install a better floor.

CalFlor   VinylFix Repair 50 Gram(s) Multiple Multi-surface repair kit

The VinylFix Mix2Match Repair Kit was developed as an easy customized repair solution for WPC, linoleum, vinyl, vinyl composition tile (VCT), luxury vinyl tile and plank. This kit allows you to repair many different types of damage on flooring and molding. The VinylFix Kit contains eight different pigments to allow for endless color combinations, all assisted by the included 28 color formulas and instructions customized for LVT, VCT and vinyl. The beige acrylic-based putty is designed to fill the damage with a strong bond and flex along with the floor in its changing conditions. This means that the filler will not break up or pop out of the repaired vinyl surface. The enclosed booklet includes both simplified and detailed instructions for repairing damage, as well as tips on applying an easy grain or marbling effect. Great for DIY and professionals. Kit includes: beige putty, 8 pigments, lacquer, mixing bowl, stir stick, measuring board, spatula, graining stick, lacquer brush, 28 color formulas, detailed instructions.

CalFlor   Installation kit

FloorFix Mix2Match Repair Kit was developed as a custom repair solution for wood, laminate and cork floors. This kit allows you to repair many different types of damage on flooring, countertops, cabinets, molding and furniture. The FloorFix Kit contains five different pigments to allow for endless color combinations, all assisted by the included 27 color formulas and instructions customized for wood and gray tones. The beige acrylic based putty is designed to not only fill the damage and harden, but to adhere and flex along with the floor in its changing conditions. This means that the filler will not break up or pop out of the repaired surface. The enclosed booklet includes both simplified and detailed instructions for repairing damage, as well as tips on applying an easy grain or marbling effect. Great for DIY and professionals! Kit includes: beige putty, 5 pigments (black, white, light, medium, dark wood tones), lacquer, mixing bowl, stir stick, measuring board, spatula, graining stick, lacquer brush, 27 color formulas, detailed instructions.

CalFlor   Installation kit

The flooring installation kit with VersaBlock™ is the all new universal kit for multiple flooring profiles with additional integrated features. Each element of this kit is built for the convenience of the installer whether it be a pro or an avid do-it-yourselfer. The added features make this a valuable kit for the whole project. The flooring installation kit with VersaBlock™ is suitable for all floating click floors laminate, LVT, WPC, MLF and wood!

CalFlor   ColorSeal 5.5 Ounce(s) Maple Multi-surface repair kit

ColorSeal flexible sealant is designed to help protect most hard surfaces by sealing perimeter expansion spaces, edges, joints, gaps and holes. This formula is long lasting and water-resistant, sealing out moisture in high risk areas such as kitchen and bathroom floors or doorways and laundry rooms. ColorSeal is great for filling around pipes, wires, door jambs, nail holes, miscues and joints during installation; making it a great addition to any toolbox. It can even be used to seal backsplash edges and seams. Available in 6 colors, ColorSeal is designed to coordinate with any project.

Linyi Pengcheng   50 -Pack Installation kit

Commercial tack strip.

CalFlor   Cherry

ColorSeal flexible sealant is designed to help protect most hard surfaces by sealing perimeter expansion spaces, edges, joints, gaps and holes. This formula is long lasting and water-resistant, sealing out moisture in high risk areas such as kitchen and bathroom floors or doorways and laundry rooms. ColorSeal is great for filling around pipes, wires, door jambs, nail holes, miss cuts and joints during installation; making it a great addition to any toolbox. It can even be used to seal backsplash edges and seams. Available in 6 colors, ColorSeal is designed to coordinate with any project.

CalFlor   ColorSeal Mahogany Installation kit

ColorSeal flexible sealant is designed to help protect most hard surfaces by sealing perimeter expansion spaces, edges, joints, gaps and holes. This formula is long lasting and water-resistant, sealing out moisture in high risk areas such as kitchen and bathroom floors or doorways and laundry rooms. ColorSeal is great for filling around pipes, wires, door jambs, nail holes, miscues and joints during installation; making it a great addition to any toolbox. It can even be used to seal backsplash edges and seams. Available in 6 colors, ColorSeal is designed to coordinate with any project.

Performance Accessories   Installation kit

Performance Accessories Flooring Installation Kit is universal for multiple flooring profiles. This kit was designed to simplify the job by giving you the right tools for your flooring installation. The VersaBlock® tapping block can be used with all types of floating or glue-down floors from 3.5mm to 12mm thick. The heavy-duty tapered pull bar fits well in small spaces giving added leverage to pull flooring together. Forty stepped spacers included in this kit are convenient for adding the needed expansion space.