Fluke Multimeters

Fluke   A3001 FC Wireless iFlex AC Current Module Digital Display Clamp meter Multimeter 2500 -Volt

All the facts, right in the field. The Fluke a3001 FC Wireless iFlex AC Current Module is one member of a family of wireless test tools that let you share test data using the Fluke Connect® app with ShareLive video call. Fluke Connect Wireless Test Tools put tools, not your body, near live electrical panels. It's simple. Connect the a3001 FC current module, or any of the other Fluke Connect remote modules, and read the results on the Fluke Connect Wireless Multimeter or a portable PC from a safe distance. Better still, the Fluke Connect test tools can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

IDEAL   Tightsight LCD Display Fork meter Multimeter 200 Amp 1000 -Volt

The IDEAL 61-415 TightSight Split Jaw Meter is a CAT IV 600V, CAT III 1000V auto ranging true root mean square (TRMS) digital fork meter that measures up to 200 Amps AC or DC between the forks. It measures up to 1000V AC and DC, continuity, resistance, capacitance, and diodes via test-leads (included) and detects the presence of voltage between 40V to 600V via a non-contact sensor in the tip of the right fork. The dual large displays can be backlit, and a built-in flashlight can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 volts, when continuity is detected and when the NCV senses voltage within its set range. The back of the meter has a built-in two position dual probe holder; the lower position allows for probe storage, the higher position allows for testing or measurement holding the meter and secured probe in one hand and the second probe in the other hand, or for both probes to be secured in the tip while conducting measurements. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. This meter features hold, min/max, relative, range, and selectable auto power off functions. The meter comes with 3 1.5V AAA batteries and an easy open, fully accessible storage pouch with a belt loop that allows for storage.

Klein Tools   Digital Clamp Meter, True RMS, AC Auto-Ranging, 600 Amps

Klein Tools CL600 Electrical Tester is an automatically ranging true mean squared (TRMS) digital clamp meter measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, and tests diodes via test-leads. Exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

IDEAL   TRMS LED Display Fork meter Multimeter 200 Amp 600 -Volt

The IDEAL 61-405 Split Jaw Meter is a CAT III auto ranging true root mean square (TRMS) digital fork meter that measures up to 200 Amps AC via the forks. It measures up to 600V AC and DC, continuity, resistance, capacitance, and diodes via test-leads (included) and detects the presence of voltage between 40V to 600V via a non-contact sensor in the tip of the right fork. The large display can be backlit, and a built-in flashlight can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 volts, when continuity is detected and when the NCV senses voltage within its set range. The back of the meter has a built-in two position dual probe holder; the lower position allows for probe storage, the higher position allows for and testing or measurement holding the meter and secured probe in one hand and the probe in the other hand, or for both probes to be secured in the tip while conducting measurements. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. This meter features hold, min/max, relative, range, and selectable auto power off functions. The meter comes with 3 1.5V AAA batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter and storage.

Fluke   377FC True-RMS Non-Contact Wireless Digital Display Clamp Meter Multimeter 1000 Amp 1000-Volt

Includes clamp, leads, grounding clip, iFlex high-current probe, magnetic hanging strap, premium carrying case.

IDEAL   LCD Display Multimeter 10 Amp 1000 -Volt

The IDEAL 61-357 digital multi Meter is a CAT IV 600 CAT III 1000V rated auto ranging true root mean square (TRMS) digital multi meter that measures up to 10 Amps AC and DC current via the test leads in series with the load. It measures up to 1000V AC and DC, LoZ (low impedance) AC V, frequency, resistance, continuity, capacitance, and diodes via test-leads (included) and measures temperature (F/C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40V to 600V via a non-contact sensor in the top center of the meter. It's display features a digital readout and also an analog bar graph representation and can be backlit. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 volts, when continuity is detected and when the NCV senses voltage within its set range. The rubber boot has two probe storage points has built-in probe tip holders to allow measurements while holding the meter in one hand and the second lead in the other hand. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. An industrial grade over molding enhances grip and drop protection. This meter features hold, min/max, relative, range, and selectable auto power off functions. The meter comes with 3 1.5V AAA batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter, probes and thermocouple storage.

Klein Tools   Clamp Meter, Digital AC Electrical Tester with 18-Inch Flexible Clamp

This clamp meter is easy to use, stand-alone, and features an 18-Inch flexible clamp that allows access into panels and hard to reach areas (bundled wires, awkward conductors, and PLC cabinets). True RMS readings with CATIV 600V or CATIII 1000V safety rating. Features backlit LCD display, auto-power off after 15 minutes, Max/Min, Hold, Auto-Ranging and Low Battery icons.

Gardner Bender   Digital Display Multimeter 500 -Volt

When you're ready to add a multi-meter to your toolbox this unit is an excellent choice. Designed to work on most household appliances and equipped with an easy-to-read 3.5 inch digital display this Gardner Bender multimeter features rubber housing to promote a steadfast comfortable grip. Engineered with four testing functions; AC Voltage to 500V, DC Voltage to 600V, Resistance to 2 meg Ohms and Battery Testing for 1.5V, 9V and 12V batteries. The 16 position manual ranging smooth rotary dial helps achieve precise and accurate readings and the low battery indicator with auto-off function helps prolong the battery life. The durable housing with a rubber boot is not only drop resistant to 6 ft. and crush rated to 150 lbs. but also features wrap-around lead holders. Snap-in probes are spaced to fit a standard outlet for quick and easy testing. Tight and secure input jacks keep the included 26 in. test leads fixed firmly in place during testing. The unit comes pre-packaged with leads and includes a 1 year warranty. Tester is rated CAT III 600V and conforms to UL 61010-1 standards and certified to CAN/CSA C22.2. (Requires 9V battery - not included)

Southwire   Digital Display Clamp meter Multimeter 1000 Amp 1000 -Volt

Rugged meter with CAT IV 600 V/CAT III 1000V safety rating.

Klein Tools   Electrical Tester, Open Jaw Fork Meter, AC Auto-Ranging, 200 Amp

The CL360 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital open jaw fork meter that measures AC current via the fork, AC/DC voltage, continuity, and resistance via test leads. It can detect the presence of voltage via the integrated non-contact voltage (NCV) tester. It includes a carrying case, test leads and 2 x AAA batteries.

Fluke   771 Milliamp Clamp Lcd Display Clamp Meter Multimeter

The Fluke 771 delivers all the basics. It measures 4-20 mA signals without "breaking the loop", allowing you to measure low level dc current while saving downtime and money. You can also use it to measure output signals from transmitters without breaking the loop when maintaining and troubleshooting process and automation equipment. This saves time and avoids disruption to the process. For more convenience, the detachable clamp can be attached to the wire you're testing while you move the meter—connected by the extension cable—to a better viewing position. This is especially helpful for taking readings in tight locations.

Sperry   400 Amp 400-Volt Lcd Ac/Dc Clamp Meter (Battery Included)

Sperry Instruments snap-around clamp meter is a 5 function, 9 range auto-ranging unit engineered to measure AC current (40-400A), AC/DC voltage (400/600V), resistance (400/4000), and continuity. Clamp meters offer a large range of functions and include LCD screens to display results but they offer the additional unique ability to measure current without having to contact live conductors. This unit features a data-hold switch to maintain the reading on the liquid crystal display (maximum count: 3999) and auto power-off functionality to extend battery life with a low battery indicator to ensure you won't get incorrect readings due to low batteries. Audible beeper permits easy continuity check (buzzer sounds at 100 ohms or less). We consider safety first; this instrument has been designed and tested according to IEC Publication 61010 and integrates features such as voltage, current and resistance overload protection and shrouded transformer jaws to further improve safety.

Extech   Digital Display Multimeter Up To 600-Volt

The MN16A is a digital mini MultiMeter. Measures AC/DC voltage and current, resistance, capacitance, frequency, continuity, diode test, type K temperature and duty cycle. In addition, it has an auto power off with disable feature. Measurements are viewed on a large, easy-to-read LCD display.