Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate. PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust. In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.
Individually wrapped, packed in 50 pcs per carton
Standard 10” x 2.5” Fit – Compatible with most 10” x 2.5” filter housings from various brands, these filters offer a universal fit for residential and light commercial systems.
Consistent Performance – Constructed from high-quality polypropylene, these filters provide fine filtration down to 5 microns; Each cartridge supports clean water flow for up to 6 months for a typical family, with minimal impact on pressure.
US Based Customer Support: Register your product online to enjoy extended warranty and complimentary tech support from our dedicated US team; We’re here to help with any concerns to ensure your satisfaction.
Individually Wrapped for Freshness – Each cartridge is sealed to preserve quality until use; Note: These filters do not reduce TDS but instead retain healthy minerals in your water; If you need TDS reduction, check out our iSpring Reverse Osmosis systems.