The Vrbgify Vehicle Exit Sensor Kit is designed to detect vehicles approaching or leaving a gate lane and activate compatible automatic gate opening systems. It works with most Ghost Controls, Mighty Mule and LiftMaster door opening systems, helping reduce the need to manually operate the gate. The kit also supports third-party door operators that provide 12 to 24 VDC or 12 to 24 VAC accessory power from the control board and use normal open and dry contact signal inputs.This vehicle exit sensor provides hands-free access for gated communities, large estates, families and guests. Vehicles can enter or leave without a remote control when the system detects them in the lane, while the gate can open and close automatically in response. The source information describes the sensor as stable and sensitive for automatic vehicle detection and indicates that it is intended to help ensure only authorized vehicles can enter and exit.For installation, place the sensor about 25 ft from the gate, no more than 2 ft deep and 8 ft from the edge of the driveway. PVC pipe is recommended for the power cords to help protect them and extend their service life. The kit includes a 50 ft five wire cable for connection to the gate opening system. Confirm that the control board provides the required accessory power and signal input arrangement before installation.The product dimensions are 17.68 x 8.11 x 2.52 in, and the product weight is 2.35 kg. The package dimensions are 17.5 x 8 x 2.5 in, with a package weight of 4.9 lb. This kit is intended for automatic gate systems that meet the stated compatibility, power and signal requirements.
Designed for compatibility with most Ghost Controls Mighty Mule and LiftMaster automatic gate opening systems to provide vehicle-activated operation without manually operating the gate
Supports third-party gate operators with 12 to 24 VDC or 12 to 24 VAC accessory power from the control board plus normal open and dry contact signal inputs
Detects vehicles approaching or leaving the lane with stable sensitive operation designed to open and close the gate automatically when a vehicle is detected
Provides hands-free gate access for gated communities large estates families and guests while allowing only authorized vehicles to enter and exit without a remote control
Install the sensor about 25 ft from the gate no more than 2 ft deep and 8 ft from the driveway edge; PVC pipe is recommended to protect the power cords
The kit includes a 50 ft five wire cable and has product dimensions of 17.68 x 8.11 x 2.52 in with a 2.35 kg product weight and 4.9 lb package weight