Vrbgify 20-piece 1/2-inch wire rope clamp set is designed for securing rigging ropes, wires and cables. Each wire rope clip is made of carbon steel with hardness, good toughness and load-bearing capacity. Its zinc-plated surface provides resistance to corrosion and abrasion. The set is intended for ropes with a 1/2-inch diameter and uses an M12 U bolt with a clip and two nuts.
To use a clip, place the wire rope in the two grooves of the clip, then tighten the nuts with a wrench until the rope is secured in place. The two grooves are designed to hold the wire rope while the nuts are tightened. The hexagon nuts have an outer diameter of 0.75 inches, so confirm that your wrench fits this size before installation. The source information identifies the set as 20 pieces of wire rope cable clip clamps.
These 1/2-inch clamps are mainly used for securing rigging ropes, wires and cables. Listed application areas include the shipping industry, bridge construction, manufacturing, the power sector and the communications department. They are also described for use in other settings involving rigging rope, wire and cable. The product information does not specify a load rating, rope length, installation spacing or other application limits, so select and install the clamps according to the requirements of your particular project.
The listed product dimensions are 7.83 x 5.35 x 3.98 inches, and the listed product weight is 1.45 ounces. Separately, the package dimensions are 7.8 x 5.4 x 4 inches, and the package weight is 0.09 pounds. These measurements distinguish the product listing information from the package information. Before use, verify the rope diameter, wrench fit and installation requirements for the intended application.
Made from carbon steel, each 1/2-inch wire rope clamp has hardness, good toughness and load-bearing capacity, while its zinc-plated surface provides resistance to corrosion and abrasion
Each wire rope clip includes one U bolt, one grooved clip and two nuts, with the clip's two grooves designed to hold the wire rope while the nuts are tightened with a wrench
The 20-piece set is intended for ropes with a 1/2-inch diameter and uses hexagon nuts with a 0.75-inch outer diameter, so confirm your wrench fits this size
Use these 1/2-inch wire rope clamps for securing rigging ropes, wires and cables in applications associated with shipping, bridge construction, manufacturing, power and communications
The listed product dimensions are 7.83 x 5.35 x 3.98 inches and product weight is 1.45 ounces, while the package measures 7.8 x 5.4 x 4 inches and weighs 0.09 pounds
These M12 wire rope cable clip clamps are supplied as a 20-piece set, and product questions can be directed to the seller through available message support
