The Vrbgify 15-piece wire rope cable clip set provides M10 U bolt saddle fasteners for 3/8 inch diameter wire rope or cable. Each clip uses a U-shaped design with an inner wall groove featuring anti-slip texture, which increases friction and helps prevent the wire rope from slipping when the nuts are properly tightened. The bolts are made of high-hardness 304 stainless steel, and the polished finish is burr-free, waterproof and designed to provide rust resistance and durability. Dense, deep threads on both sides help distribute force evenly and allow the nuts to be screwed on smoothly during installation.
To install a clip, place both ends of the wire that need to be fixed into the U-shaped groove, then tighten the nuts at both ends until the connection is firm. The set is suitable for a range of listed applications, including decoration projects, construction, ships, marine applications, clotheslines, stage lighting safety ropes, guardrail systems, fixed loads and fence repairs. Use the clips only with compatible 3/8 inch wire rope or cable, and select installation methods appropriate for the specific project. The supplied information does not state a working load limit or other capacity rating, so those details should be confirmed before use where load requirements apply.
The clips have a silver finish and are supplied as a 15-piece set. The listed product dimensions are 5.79 x 3.03 x 2.13 inches, and the product weight is 2.06 pounds. Package dimensions are 5.8 x 3 x 2.1 inches, with a package weight of 2.06 pounds. These package measurements describe the packaged item and should not be treated as assembled clip dimensions. If there is dissatisfaction with the wire rope cable clips within 30 days after receiving the product, the supplied purchase information states that the customer may contact the seller for a refund. Questions or feedback may also be submitted by email.
Includes 15 silver M10 wire rope cable clips designed for 3/8 inch diameter wire rope or cable, providing a set of U bolt saddle fasteners for supported fixing applications
Made from high-hardness 304 stainless steel with a polished finish that is burr-free, waterproof and designed for rust resistance and durability in applicable environments
The U-shaped clamp design includes an inner wall groove with anti-slip texture to increase friction and help prevent the wire rope from slipping when properly tightened
Dense deep threads on both sides help distribute force evenly, while the included nuts can be screwed on smoothly to secure the wire rope clip during installation
To use, insert both ends of the wire into the U-shaped groove and tighten the nuts at both ends until the connection is firm, following appropriate installation practices
Suitable for decoration projects, construction, ships, marine applications, clotheslines, stage lighting safety ropes, guardrail systems, fixed loads and fence repairs
