The Vrbgify wire rope cable clip clamp set includes 120 small U-bolt saddle fasteners for compatible wire rope and cable projects. Each clamp fits a wire rope diameter of 3 mm or 1/8 inch and is made from 304 stainless steel. The clamps have an M4 x 0.7 bolt, an 11 mm or 0.43 inch thread length and a listed size of 20.5 x 18.5 mm or 0.81 x 0.73 inch. The polished surface is smooth and burr-free. Deep serrations and the threaded nut work with anti-slip grooves on the inner wall to increase friction and help prevent the cable from slipping under tension. To use a clamp, insert the cable into the U-bolt, secure the nut at the end and tighten it to create a secure loop. These clips are suitable for a variety of rigging ropes, cables, steel wire ropes, steel ropes and plastic-coated ropes. Common applications listed for this set include temporary guardrail systems, securing cable railings, construction lifting, pulling, safety ropes, hanging banners, shade sails, tent ropes, clotheslines, anchoring fitness equipment, hanging ropes, flags, signs and rigging projects. Before purchasing, confirm that the clamp matches the diameter of the cable being used. The packing list contains 120 wire rope cable clip clamps. The listed product dimensions are 0.81 x 0.73 x 0.81 inches, while the package dimensions are 4.92 x 3.94 x 2.17 inches. The product weight and package weight are each listed as 2.62 pounds. Silver coloring completes the set.
Use these wire rope cable clips with 3 mm or 1/8 inch wire rope, steel cable, steel rope, rigging rope and plastic-coated rope for various projects
Each clamp is made from 304 stainless steel and has an M4 x 0.7 bolt, an 11 mm or 0.43 inch thread length and a 20.5 x 18.5 mm size
The polished surface is smooth and burr-free, while the 304 stainless steel construction provides resistance, high hardness and bend resistance for long-term use
Deep serrations, a threaded nut and anti-slip grooves on the inner wall increase friction to help prevent the cable from slipping under tension
Insert the cable into the U-bolt, place the nut on the end and tighten it to create a secure loop for suitable wire rope applications
The 120-piece set supports temporary guardrails, cable railings, construction lifting, pulling, safety ropes, banners, shade sails, tents, clotheslines, flags and signs
