VEVOR Plasma Cutter 50Amp Non-Touch Pilot Arc Air Cutting Machine with Torch 110V/220V Dual Voltage AC IGBT Inverter Metal Cutting Equipment for 1/2in Clean Cut Aluminum and Stainless Steel

This plasma cutter offers dual voltage 110V/220V with an adapter, suitable for various power sources.

The two cable racks allow for easy storage of bulky cables, cutting torch, and power cable; It's lightweight at 22 lbs/9.98 kg and has a comfortable handle for portability.

It features an all-in-one type switch with dust-proof and waterproof properties, safe and convenient for beginners.

Non-Touch Pilot Arc: Pilot arc technology allows you to cut without touching the tip of the metal; This plasma cutter pilot arc delivers a consistent and precise current to the cutting surface with better cutting quality and longer consumable life; Ideal Clean Cut: 1/2"(12 mm); Maximum Severance Cut: 5/8"(16 mm);

All Safety No Heat: The unique air channel design increases the heat dissipation of the power device; The IGBT inverter will greatly improve the performance of the plasma cutting machine; The outstanding 30%@104 °F, 50A; 60%@104 °F, 33A; 100%@104 °F, 25A duty cycle can also ensure long-time cutting;

50AMP Premium Cutter: Use non-hazardous compressed air to cut aluminum, stainless steel, mild steel, copper, and other metals; Suitable for a wide range of applications, including sheet metal fabrication, light industrial, automotive repair, plumbing work, and other maintenance services; You'll be prepared to take on any challenge!

Sharper than Sharp: The gastight air filter regulator allows you to quickly connect to your air compressor; It can lower or maintain air pressure to reach effective cutting; And you can cut through rough, painted, and rusty surfaces while producing minimal slag without any air leakage;

More than You Expected: The extra long 16.4' plasma torch and 6.56' ground clamp with cable offers maximum convenience by extending your working area; Quit wasting time searching for an extension cord and adapter; The kit also includes an air regulator, air hose, 4 hose clamps, 2 cable racks, and some consumables;

Specification: Model: VV-PC-CUT50P; Arc Striking: HF Pilot Arc; Input Voltage: AC110/220V±10%; Output Current: 110V: 20-40A; 220V: 20-50A; Ideal Clean Cut: 1/2"/12 mm; Maximum Severance Cut: 5/8"/16 mm; Cutting Material: Aluminum, Stainless Steel, Mild Steel, Copper; Duty Cycle: 30%@104 °F, 50A；60%@104 °F, 33A；100%@104 °F, 25A; Power Factor: 0.8; Efficiency: 0.86; Insulation Grade: F; Open Circuit Losses: 220V 14W; 110V 56W; Operating Air Pressure: Less than 0.5MPa; Access Air Pressure: Less than 0.8Mpa; Enclosure Protection Level: IP21S; Item Weight: 23lb/10.4 kg; Item Size: 14.2" x 5.9" x 11.8"/36 x 15 x 30 cm