Rane RNE-TERMINAL1010 Multiprocessor 1U 10-inx10-Out 6 RAD Plus Ports and Dante Expansion Slot

Multiprocessor 1U 10-Inx10-Out 6 RAD Plus Ports and Dante Expansion Slot The Rane Terminal 1010x takes the DSP Experience to the next level with an intuitive front-panel that enables users to control 10 analog balanced inputs for Mic/Line/+48V and 10 balanced outputs. There are also 6 flexible RAD Plus PoE ports to connect breakout boxes and wall plate remote controls and 4 Universal GPIO logic ports for external devices such as alarm systems, sensors, lights, projectors, etc. There is also a slot for an optional DANTE 32x32 card for network connectivity.Features: Native Analog 10-in/10-out 6 RAD+ Ports support RADs and DRs - adds 12-in/12-out, for a total 22-in/22-out Optional DANTE card adds 32-in/32-out on the network Expansion Port for future hardware releases Online Wizard for quick-start using Halogen software Enhanced front panel control and monitoring Specifications: Analog I/O Type: 10 in x 10 out ADC: High definition audio 24-bit, 48kHz, DR 116dB A-weighted DAC: High definition audio 24-bit, 48kHz, DR 116dB A-weighted Inputs Frequency Response: 20Hz-20kHz, and plusmn;0.1dB Input Connections: ( 5) Euroblock connectors, 6 pins each, 3.81mm pitch, green. Condenser Mic Mode Type: Active balanced, microphone input mode with 48V phantom power Phantom Power: +48V Maximum Input: 1Vrms Input Impedance: 2.5kand Omega-Each leg Dynamic Mic Mode Type: Active balanced, microphone input mode without phantom power Maximum Input: 250mVrms Input Impedance: 2.5kand Omega-Each leg Line Mode Type: Active balanced, line-level Maximum Input: 8Vrms Input Impedance: 5kand Omega-Each leg Line+Mode Type: Active, left + and right - signals summed to mono Maximum Input: 8Vrms Input Impedance: 5kO Each leg Outputs Connections: ( 5) Euroblock connectors, 6 pins each, 3.81mm pitch, orange. Type: Active balanced, line output mode with active output transient muting Maximum Output: 8Vrms Impedance: 300O Each leg Frequency Response: