The Rane RAD26 provides any room with end user control via the color LCD display and rotary encoders. It also features a dual universal audio I/O interface, line-level input jacks for local needs, a headphone output, and a dual 4-watt amp all using using one shielded cat5e ( or better) cable drop. Three logic closure inputs and three active-low outputs add to the control capabilities. The built-in amplifier powers a small stereo pair of room speakers, or it can be switched in software to power a single 8-watt speaker. The RAD26 provides enough I/O and control to support one room in a HAL audio system which may require:Local audio line input ( smartphone, laptop, MP3, DVD)One or two microphone or line-level inputsAmplifier outputs for ceiling speakersLevel controlSource selection On the rear, there are 2 balanced Euroblock Mic/Line/Line-Plus audio inputs with the mode set in Halogen software. The Line-Plus inputs accept unbalanced left and right signals, and sums them to mono. Also, 24V phantom power is available for condenser mics. For end users, there is a 3.5 mm Aux input on the underside of the front, accepting the output of a smartphone, laptop or other consumer device. Balanced line outputs can drive an external amplifier or powered subwoofer for more output. Software logic senses an inserted connector at the Aux In or Headphone jacks to optionally override the rear connections. Features Two balanced Euroblock inputs MIC/LINE/LINE+ Remote Audio Device with audio and logic I/O and on-board 2-ch 4W amplifier Local audio line input ( smartphone, laptop, MP3) Amplifier outputs for speakers Level control Source selection Includes: 1x RAD26 1x Mounting Bracket 1x Installation Tool 1x User Guide 1x Safety and Warranty Manual Specifications Input Impedance: 2.9k 1 - Each leg to ground Inter-Channel isolation:>100dB typ - 20Hz-20kHz, unity gain, channel-to-channel CMRR: 55dB min - 1kHz Inputs Dynamic Mic Mode: Active Balanced - Mic input mode without
The Rane RAD26 provides any room with end user control via the color LCD display and rotary encoders. It also features a dual universal audio I/O interface, line-level input jacks for local needs, a headphone output, and a dual 4-watt amp all using usin
Made from Top Quality material
