The Rane RAD22 adds flexible I/O capability to RANE DSP systems. It provides two mic and two line inputs via XLR/TRS combination jacks and an 1/8-" ( 3.5mm) stereo line output for monitoring, recording or amplification. Smart muting allows for the disconnecting of XLR and 1/4-" cables to prevent disruption to sound systems for hot-swapping of microphones - even with 24V phantom power applied. Connect the RAD22 to RANE DSP with a Cat5e ( or better) cable for a local run up to 500 feet ( 150m) away from the equipment rack. Each RAD22 may be installed onto a standard U.S. two-gang electrical box, or flush-mounted to a wall surface. Features 3.5mm TRS line output for recording, monitoring with headphones, and live sound amplification ( 2) XLR/TRS combo jack inputs with auto-switching for MIC or LINE level inputs Smart muting enables hot-swapping of inputs without sound system disruption RJ45 connection to Rane multiprocessor Standard enclosure and standard back box mounting options for US, UK and EU Isolation circuitry prevents hum due to long cable runs with ground differentials Improved codec for superior audio transmission Completes the RAD family while complimenting the RAD16z Includes: 1x RAD22 1x Mounting Plate 1x Screws 1x Installation Tools 1x User Guide 1x Safety and Warranty Manual Specifications Input Signal LEDs Green LED: 50 dBFS Input Signal LEDs Red LED: 0.5 dBFS Microphone Inputs: ( Level set in hardware) Input Impedance: 2.16 k balanced ( 1.08 k + 1.08 k) Gain Range ( dynamic mic mode): 26 - 46 dB, in 1 dB steps Gain Range ( condenser mic mode): 14 - 34 dB, in 1 dB steps Max Input ( dynamic mic mode): -16 dBu, Gain - 26 dB Max Input ( condenser mic mode): -4 dBu, Gain - 14 dB Equivalent input Noise: -121 dBu, 20 kHz BW, Rs - 150, Gain - 26 dB CMRR: -70 dB, Rs - 150, 1kHz, Gain - 26dB Frequency Response: 20 Hz - 20 kHz, +0, -0.5 dB at all Gain settings THD + Noise: < 0.010 1 kHz, 20 kHz BW, Rs - 150, Output - -6
The Rane RAD22 adds flexible I/O capability to RANE DSP systems. It provides two mic and two line inputs via XLR/TRS combination jacks and an 1/8-" ( 3.5mm) stereo line output for monitoring, recording or amplification. Smart muting allows for the
Made from Top Quality material
