The RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. Features Interfaces Four Dante Inputs and Four Dante Outputs Converts Four Standard Mic or Line Audio Sources to Dante Network Channels Each Input is Switch-Selectable for Mic or Line No User or Installer Gain Adjustments are Required Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics P48 Phantom is Provided on Each Microphone Input Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with> 18 dB Headroom Front-Panel Signal LED for Each Audio Input Converts Four Dante Network Audio Signals to Balanced Line Level Line-Level Outputs Provide +4 dBu with> 18 dB Headroom Signal LEDs Indicate Audio for Each of the Received Network Signal Channels High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion LED Indicators Show Network Sync Status Normal or Hot-StandBy Operation from PoE ( Model RU-MLB4P) Equipped for Rack Mounting or Surface Mounting Specifications Network Connector: RJ45 with Link and Speed indicators Digital Audio Ethernet Protocol: Dante Transmission Rate: 100 Mbps Sample Rates Supported: 44.1 kHz, 48 kHz ( default) Audio Operating Levels: -18 dBFS - +4 dBu Inputs ( 4): Balanced, Detachable Terminal Block Gain: Automatic, 40 dB for condenser mics, 60 dB for dynamique mics Input Impedance:> 1 k Phantom Power: P48, 48 Vdc Standard for Phantom: IEC 61938 Frequency Response: 20 Hz to 20 kHz ( and plusmn-0.5 dB) CMRR:> 70 dB ( 50 Hz to 120 Hz) Input Level for +4 dBu: +4 dBu ( balanced), -10 dBV ( unbalanced) Input Impedance:> 20 Frequency Response: 20 Hz to 20 kHz ( and plusmn-0.5 dB) CMRR:> 60 dB ( 50 Hz to 120 Hz) Headroom above +4 dBu:> 18 dB Outputs ( 4):
The RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or
Made from Top Quality material
