PESA's PRO-HDMI2HD is a throw-down style converter module allowing HDMI in 480p, 720p, or 1080p to SD-SDI, HD-SDI, or 3G-SDI video signals to be viewed or recorded to a professional broadcast device supporting SMPTE 259, 292, or 424. The supplied power brick accepts a primary power input of 100-240V, 50/60Hz, and supplies a +5V DC output. Power consumption is less than 3 watts. Each PRO-HDMI2HD module sends output signals through a standard 75 Ohm BNC connection. Destination devices can be located up to 300m ( 1000ft) for SD-SDI, up to 150m ( 500ft) for HD-SDI, and 90m ( 300ft) for 3G-SDI. The compact pack comes with two mounting tabs for easy attachment to wall or under-the-table locations. Features Input support for HDMI Deep Color Support for HDCP Output support for 3G-SDI formats( SMPTE 425M, Level A): 1080p 50/59.94/60Hz ( 4:2:2) Bit Rates for 2.97 Gbps, 2.967Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps Auto 3G/HD/SD-SDI detection Easy installation with wall mounting design Supports up to 8 channels of audio, 7.1 or 5.1 optional Low jitter Re-clocked outputs for looping SD/HD/3G SDI signals Specifications Number of Outputs: 1 Connector Type: HDMI, Type A ( 19 pin female) Cable Connection Distance: 15m Number of Outputs: 2 Connector Type: BNC, 75 Ohm Video Bandwidth: 2.97 Gbps , 2.970/1.001 Gbps Auto Detect: Yes Video Support: 3G 1080p50/59.94/60 - 4:2:2 Audio Support: Yes, embedded Housing Dimension: 79mm x 84mm x 27mm, 3.1 x 3.3 x 1.2 inches Operational Temperature: 0-40 degree C Operational Humidity: 20-90 RH ( non-condensation) Power Connection: +5VDC ( inter-locking power plug) Power Consumption: 3W ( max) AC Power Brick: 100-240VAC, 50/60Hz Weight: 1.15 lbs
PESA's PRO-HDMI2HD is a throw-down style converter module allowing HDMI in 480p, 720p, or 1080p to SD-SDI, HD-SDI, or 3G-SDI video signals to be viewed or recorded to a professional broadcast device supporting SMPTE 259, 292, or 424. The supplied power
Made from Top Quality material
