Use the NTI Waterproof Gigabit Power over Ethernet Extender to extend a POE signal up to 328 feet ( 100m) in harsh environments. Cascade ST-POE-WTP units to extend POE signals up to 1640 feet ( 500m). Features Input power source requires POE ( switch or injector), output endpoint can be a POE or non-POE device Support for EIA568A and EIA568B Extend a POE signal up to 328ft ( 100m) over a single CAT cable ( shielded cables recommended) Cascade a maximum of four ST-POE-WTP units to extend a POE signal up to 1640ft ( 500m) over a CATx cable For harsh industrial or outdoor environments Power over Ethernet - no additional power source required Fully compatible with Gigabit Ethernet IEEE802.3af and IEEE802.3at compliant Supported wire gauge: 24AWG Compact size, wall-mountable design IP66 rated waterproofing CATx cable with a 6mm-7mm O.D. is recommended for waterproofing Support for EIA568A and EIA568B Regulatory approvals: CE, FCC, RoHS Specifications Data Rate: 10/100/1000Mbps PoE Standard: IEEE 802.3af ( PoE), IEEE 802.2af ( PoE+) PoE Power Supply Type: Mid-Span/Type B ( No external adapter required) PoE Output Pin Assignment: 4/5( +), 7/8( -) Ethernet + PoE In: 1x RJ-45 Connector Ethernet + PoE Out: 1x RJ-45 Connector Input Power: Powered by 48VDC from PoE switch or Mid-Span injector IEEE 802.3af/IEEE802.3af ( PoE+) PoE Output Power: 22W Max Powered Devices: 1 Enclosure: Metal Dimension ( HxWxD): 7.28 x 1.77 x 1.77-" Temperature: 0 Operating: -13 degrees to 131 degrees F ( -25 degrees to 55 degrees C) Storage: -22 degrees to 158 degrees F ( -30 degrees to 70 degrees C) Humidity: 5 to 90 ( non-condensing) Weight: 0.47 lbs
Use the NTI Waterproof Gigabit Power over Ethernet Extender to extend a POE signal up to 328 feet ( 100m) in harsh environments. Cascade ST-POE-WTP units to extend POE signals up to 1640 feet ( 500m). Features Input power source requires POE ( switch or
Made from Top Quality material
