Led Strobe Light Kit

Led Strobe Light Kit- Ringing Phone Or Tty Indication For The Hearing Impaired - Ringing Phone Indication In Loud Warehouses And Factories - Emergency Illumination For Emergency Phones In Elevators Campuses Hallways Parking Ramps Etc. - Alarm Indication For Security Systems Or Alarm Panels With Phone Dialers - Durable Polycarbonate Lens - High Output Long Life Led Technology - Four Programmable Flash Patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash - 6 Programmable Beacon And Strobe Brightness Settings - Immune To Shock And Vibration - Flush Mount Or Surface Mount With Weatherproof Single Gang Box (included) - 3/4 Knockouts For Connecting Conduit Etc. - Strobe And Control Module May Be Installed Separately - Can Be Configured To Signal: Ringing Off-hook A Combination Of Both Ringing And Off-hook (line In-use) Or Triggered From A Contact Closure - One Set Of (no) Normally Open And (nc) Normally Closed Relay Contacts Provided - Selectable Ring Cadence Mode (strobe Light Will Remain Flashing Between Rings) - Switched 12v Dc Output (follows Relay Activation For Powering Strobe Lights Cameras Etc.) - On/off Switches For Ring Detection And Off-hook/loop Detection - Disable Input Ideal For Use With Two-button Emergency Phones Like Viking S E-1600-20a (dod 215) Will Not Activate Strobe Light On Info Calls - Power: 120v Ac To 12v Dc Adapter Provided - Maximum Power Supply Run Length On Cat-5: 1 Pair = 125 Ft 2 Pair = 225 Ft 3 Pair = 325 Ft 4 Pair = 475 Ft - Maximum Sl-2 Wire Run Length On Cat-5: 3 Wires = 100 Ft 6 Wires = 300 Ft - Strobe Dimensions: 111mm Diameter X 69mm (4.38inch X 2.75inch) - Control Module Dimensions: 74mm X 53mm X 25mm (2.9inch X 2.1inch X 1.0 ) - Shipping Weight: 1.5 Kg (3.3 Lbs) - Operating Temperature: -26 To 54 C (-15 To 130 F) - Relay Contact Rating:.5a 125v Ac/1a 30v Dc - Minimum Loop