The ETS InstaSnake Panel SDS908 is a 2-rack high panel which has ( 8) etherCon RJ45 jacks on the frontand ( 32) XLR connectors on the back. These panels allow you torun audio signals over UTP cables ( Cat5e or better data cables).The InstaSnake Panel is a passive unit - you do not needexternal power. These panels were designed to accept -"mic-"level or line level analog or digital audio. It supports phantompower when using shielded UTP cables. Designed to the highest professional standards, theInstaSnake panel has a wide flat frequency response, low THD,and, low residual noise. The InstaSnake panel has been factorytested to 1900 feet over Cat5 using balanced line, lowimpedance, dynamic microphones. Phantom power has beentested to 850 feet over shielded UTP cables.Use SDS901 or SDS902 units to convert signals to and fromthe UTP cables. Features Transmit audio over UTP cables, reducing weight and cost 32 channels analog audio or 64 channels digital audio Utilize existing telecom wiring Support phantom power when shielded UTP cables are used Connectors - all high quality Easy rack mount, 19-" 2 RU spacing Rugged metal enclosure USA Made - 100 tested Specifications Connectors: ( 32) female XLR connectors to ( 8) etherCon RJ45 jacks: Ch x-1, pins 5and 4 Ch x-2, pins 1and 2, Ch x-3, pins 3and 6, Ch x-4, pins 7and 8 Media and Distance: Cat5e or better, UTP - 1900 ft, FTP or STP - 850 ft. phantom power only Size: 2 RU x 121 mm deep
The ETS InstaSnake Panel SDS908 is a 2-rack high panel which has ( 8) etherCon RJ45 jacks on the frontand ( 32) XLR connectors on the back. These panels allow you torun audio signals over UTP cables ( Cat5e or better data cables).The InstaSnake Panel is
Made from Top Quality material