The Attero unDX2IO+ Dante Audio Interface is a cost effective multi-IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. The unDX2IO+ is designed to fit into all dual gang US junction boxes, mud rings, and old work brackets. The unDX2IO+ is PoE enabled, so all connectivity ( Power, control, and data) is provided by a single CAT-5/6 cable. The unDX2IO+-s size and I/O density make it easy to put Dante connectivity wherever it's needed. Features Small form factor, can be unobtrusively located near analog sources or sinks Four input gains to accommodate common line levels, dynamics, and phantom powered mics +48V phantom power per channel - powers all types of phantom powered microphones typically used in installed AV systems Analog output gain is software adjustable between 0dB and -60dB plus mute to accommodate all types of line input levels ( at 0dB input gain) and +20dBu maximum output levels Full Dante system status LEDs on the front panel Specifications Number of Channel: 4x2 Mic/Line Gain: -15dB ( pad active), 0dB, +25dB, +40dB, Software Selectable Input Impedance:>1.8k ohm at any gain setting Equivalent Input Noise: -115dBu ( +40dB gain) Output Type: Balanced line level on XLR. with automatic muting on loss of Dante signal Output Gain: 0dB - -60dB plus mute, software selectable Dimensions: 3.54-" x 4.2-" x 1.88-" Operating Temperature: 32 deg F - 104 deg F ( 0 deg C - 40 deg C) Weight: 1 lbs
The Attero unDX2IO+ Dante Audio Interface is a cost effective multi-IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the
Made from Top Quality material
