The Attero Tech unD4O Dante interface is a 4 output, cost-effective way to add up to four analog output channels to an existing Dante-based networked audio system. The unD4O's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio sink - thereby eliminating costly and interference prone analog wiring. The unD4O is powered by either external +24VDC or any PoE network switch. FeaturesFully DDM ReadySmall form factor, can be unobtrusively located near analog input devices in systems with Dante audio infrastructure4 balanced line-level analog outputs driven from 4 Dante channels within up to 2 different Dante audio flowsMaximum output level of +20dBu (+20dBu = 0dBFS in the digital domain)Power, Sys, Error, and Sync LEDs on the front panel for easy network troubleshootingPoE powered to work with any compliant 802.3af PoE network switch or mid-span injector, external +24VDC supplySpecificationsPower: 24V DCOutput Gain: 0dBOutput Noise: 20-20 kHzMaximum Output Level: Plus 20dBuSystem THD: Less Than 0.01% at an output level 3dB below maximumDC Input Power: Plus 24V DC at at 250mA
