Adder ADR-CATX-USB-DA CATx USB Dual Access Computer Access Module

The CATx Dual Computer Access Modules ( CAMs) are highly compact devices that allow you to share a single computer between two sets of peripheral devices. In simple terms the CAM can be viewed as a combined video splitter and peripheral hub. This is useful for mixing local and remote stations or mixing KVM with extension or signage systems.The module connects to the video, USB, audio and RS232 ports of your computer and then connects via CAT 5, 5e or 6 cabling to the ADDER View CATx KVM switches and/or ADDER extender receivers ( either ADDER Link X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are linked to the remote devices.The CATX-USB-DA variant is not fitted with audio or serial ports but is otherwise identical to the CATX-USBA-DA model. Features Supports absolute mouse mode when used in conjunction with supporting equipment Two channel CD quality audio is supported The module contains a default set of EDID information that supports display resolutions up to 1920 x 1200 60Hz In addition, the module will check during power up whether alternative EDID CAMs information is from the KVM switch or extender that is connected to port A The CATx Dual CAM uses a USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation Control of the host computer is arbitrated by the module on a first come, first served basis From one of the remote keyboards, a terminal program on the computer can be used to send the appropriate character to the COM port that has been allocated to the module Resolutions and Cable Lengths 1920 x 1200 60Hz at 100m 1600 x 1200 60Hz at 200m 1280 x 1024 60Hz at 300m Resolutions and Cable Lengths 1920 x 1200 60Hz at 100m 1600 x 1200 60Hz at 200m 1280 x 1024 60Hz at 300m Extension Distance 1920 x 1200 60Hz at 100m 1600 x 1200 60Hz at 200m 1280 x 1024