The CATX DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. The CAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the ADDER View CATx KVM switches and/or Adder extender receivers ( either ADDER Link X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are then all linked to the remote device. Features Resolutions and cable lengths - the maximum resolutions achievable are 1920 x 1200 x 60Hz at 200m and 1280 x 1024 x 60Hz at 300m Power The CATX DisplayPort CAM uses the USB port to derive its power from the host computer Dispensing with the need for a separate power supply and thus simplifying installation Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA Power is not taken from the DisplayPort connector Mini DisplayPort version Some computers, servers and graphics cards ( Apple Mac Pro and ATI Radion graphics cards) Come with mini DisplayPort connectors as these are smaller than the standard connector A version of the CAM with Mini DisplayPort connectors EDID display information The module will check during power up the EDID information USB The CAM supports low speed ( 1Mb/s) HID USB devices only Audio 2 channel CD Quality audio is supported via a 3.5 mm jack plug Specifications Maximum Video Resolution: 1920 x 1200 Power: USB Powered Device Max 500mA at 5V Operating Temperature: 0C to 40 and 32F to 104F Weight: 0.25 lbs
The CATX DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. The CAM connects to the DisplayPort video connector plus USB and Audio ports on your
Made from Top Quality material
