Tekton Angled End Handled Pry Bars are made with a bar stock that's heat-treated to balance strength and toughness. The black oxide finish won't flake or chip off. The end of the pry bar is angled for prying and positioning: slide in between materials or under objects with the pry bar's chisel tip, then use the angled end of the bar as a fulcrum to push apart or lift up the workpiece. The 1-inch diameter solid steel striking cap is designed to be struck by a hammer. The end of the cap directly contacts the bar stock so that any force you apply is effectively transferred through the tool. The large polypropylene handle is impact-resistant and unaffected by most fuel, solvents, and common chemicals. It's lightly textured to provide your hands extra grip when working. The included hanger is made from 12 gauge powder-coated steel with a textured finish. It's designed to fit Tekton pry bars and comes with two flanged screws for mounting. The top tabs secure the pry bars in the hanger so they can't fall off.
Strong Bar Stock – The pry bar shaft is made from 3/8–5/8 inch (depending on the pry bar length) solid steel that's heat-treated to maintain strength and toughness
Angled for Prying and Positioning – Slide in between materials or under objects with the pry bar's chisel tip, then use the angled end of the bar as a fulcrum to push apart or lift up the workpiece
Comes with Wall Hanger – The 12 gauge steel wall hanger is designed to securely hold Tekton pry bars so they won't fall off the wall; it also comes with two flanged hex head screws for mounting
Steel Striking Cap Contacts Bar – The 1-inch diameter solid steel striking cap is designed to be struck by a hammer; the end of the cap directly contacts the bar stock so that any force you apply is effectively transferred through the tool
Durable Handle – The large, polypropylene handle is impact-resistant and unaffected by most fuel, solvents, and common chemicals; it’s lightly textured to provide your hands extra grip when working
5 pc pry bars: 12, 17, 25, 36, and 45 inch
5-tool pry bar wall hanger; 2-pc 1/4 x 1-1/4 in flanged hex head screws
