Tekton insulated pliers and screwdrivers have insulated handles to protect against electrical shock for voltages up to 1000 V AC and 1500 V DC. This set includes combination, long nose, and diagonal cutting insulated pliers and Phillips (JIS compatible), slotted, and square insulated screwdrivers. The jaws on the combination pliers have six work zones: a wire cutter for fast, clean cuts, flat tips for even clamping, hex-grip teeth for turning hex bolts, coarse teeth for an aggressive bite, fine teeth for controlled gripping, and a wire groove for holding a single wire. The jaws on the long nose pliers have five work zones: serrated surfaces at the tip for controlled gripping, smooth surfaces in the middle for non-marring clamping, coarse teeth for an aggressive bite, a knife-to-knife wire cutter, and hex-grip teeth that can turn bolts in a pinch. The diagonal cutting pliers have a 0.9 inch cutting capacity for a variety of wire and cable sizes. On the screwdrivers, the shank diameter is reduced so the insulation can be molded flush with the tip, giving you access to screws in narrow, recessed holes. Each driver has the tip size engraved in three locations with high-contrast laser markings. The handle is molded around the shank, creating a solid connection that is stronger and straighter than simply pressing the shank into a premade handle. The tip is precisely machined and coated with black manganese phosphate, creating a slightly rough surface that enhances screw engagement.
Insulated for Electrical Work – The handles of the screwdrivers and pliers are insulated to protect against electrical shock for voltages up to 1000 V AC and 1500 V DC
Phillips, Slotted, and Square Screwdrivers – The screwdriver tips are precisely machined and coated with black manganese phosphate, creating a slightly rough surface that enhances screw engagement, preserves tip geometry, and resists flaking
Steel Screwdriver Shank Won't Twist Out – The screwdriver handles are molded around the shanks, creating a solid connection that is stronger and straighter than simply pressing the shank into a premade handle
Combination, Long Nose, and Diagonal Cutting Pliers – The combination pliers have six distinct work zones, the long nose pliers have five distinct work zones, and the diagonal cutting pliers are dedicated wire cutters
Flared Handles – The tops of the handles are flared to give your hand a positive stop to push against without slipping towards the conductive head of the pliers
3-pc insulated pliers: 8 Inch long nose, 7 inch diagional cutting, 7 inch combination
2-pc Phillips insulated screwdrivers: #1, #2
4-pc slotted insulated screwdrivers: 3.5, 4, 5.5, 6.5 mm
2-pc square insulated screwdrivers: #1, #2
