GIVIMO 88-lb 40-kg Single Horn Blacksmith Anvil 23.3-in Long 6.7-in High 6.4-in Wide Hardened Steel Forging Anvil 55-HRC Face with 1-in Round Pritchel Hole 0.9-in Hardy Hole Polished Top and 9 x 6.4-in Base for Blacksmithing Forging and Metal Shaping

88-lb Mass That Stays Planted: Mass of 88 lb / 40 kg on a 9 x 6.4-in base absorbs recoil instead of walking across the stand, which separates a working anvil from a bench-top novelty

55-HRC Quench-Hardened Face: Quenching brings the working face to 55 HRC so hammer blows rebound into the work rather than denting the top, and the polished surface leaves cleaner stock

Hardy and Pritchel Holes: A 0.9 x 0.9-in / 22 x 22 mm hardy hole seats bottom tools while the 1-in / 25 mm round pritchel hole clears punches for hot punching, slitting, and twisting

Smiths Knifemakers and Metal Shops: Riveting, flattening, drawing out, straightening, and scrolling all run on one block, which suits blacksmiths, farriers, and metal fabrication

Horn Plus a 23.3-in Flat Top: A tapered round horn rolls rings, scrolls, and curves while the long flat top straightens bar and flattens sheet, and spray coating slows oxidation

Specification: Material: hardened steel, forged construction; Weight: 88 lb / 40 kg; Overall Length: 23.3 in / 592 mm; Height: 6.7 in / 170 mm; Width: 6.4 in / 162 mm; Base Dimensions: 9 x 6.4 in / 232 x 162 mm; Hardy Hole: 0.9 x 0.9 in / 22 x 22 mm square; Pritchel Hole: 1 in / 25 mm round; Face Hardness: 55 HRC after quenching treatment; Surface: fully polished with protective spray coating; Horn: single tapered round horn; Package Weight: 85 lb / 38.56 kg; Carton Dimensions: 25.2 x 8.7 x 9.8 in / 64 x 22 x 25 cm; Suitable For: forging, bending, riveting, flattening, straightening, drawing out and shaping metal; Package Includes: 1 x Single Horn Anvil