80 watt x 4 at 70V-100V Digital Matrix Processor with Ethernet Control and Dante Input and Output The Stewart Audio FLX-E-80-4-CV-D is a 4 channel, 70V/100V, -1/2 rack amplifier delivering 80W per channel with built in DSP, ethernet control and reporting, secondary RS-232 control and remote volume control. The FLX-E-80-4-CV-D amplifier supports Dante audio.The FLX-E series of amplifiers is the most versatile -1/2 rack amplifier Stewart has ever produced. The FLX-E-80-4-CV-D provides 80 watts from each of the four 70/100V output channels. At the heart of the amplifier is a robust, internal, full-function DSP designed to solve a multitude of your audio problems in just one enclosure. The DSP includes a full cross-point mixer, EQ, filters, limiters and much more. An ethernet port makes programming simple, fast and repeatable for large installations. The ethernet, RVC and RS-232 allow volume control from a wide range of devices. In addition, the Dante network capability provides four network input audio channels and four network output audio channels. Applications: Dante/AES67 Network Audio Hospitality Installations Education Conference Rooms Houses of Worship Room combiningFeatures:. Onboard DSP for signal routing, filtering, ducking, compressor, limiter, etc. Ethernet configuration, control and reporting. 4 Analog Inputs ( 4 line/mic- 2 w/phantom power). 4x4 Break in/Break out Dante channelsSpecifications:. Output Power: 80W x 4 70.7V/100V. Frequency Response ( +0, -3dB):100 Hz-20 kHz ( 70.-7/100V). THD+N: <0.05 Percent 6dB below clipping. Signal-To-Noise Ratio: >95dB. Input Sensitivity: 1V ( 0 dBV). Input Impedance ( Balanced/Unbalanced/Phantom): 7.2k Ohms/3.6k Ohms/2.4k Ohms. Power Consumption - Idle, -1/8 Power: 12W, 60W. Amplifier Class: D. Channel To Channel Isolation: >60dB FLX-E-80-4. Dante Audio Sampling Rates: 44.1, 48, 88.2, 96, 176.4, 192ksps. Remote Volume: 0 - 10V. Input Connectors: 3.5mm Euroblock- 24V Phantom Power on 2
80 watt x 4 at 70V-100V Digital Matrix Processor with Ethernet Control and Dante Input and Output The Stewart Audio FLX-E-80-4-CV-D is a 4 channel, 70V/100V, -1/2 rack amplifier delivering 80W per channel with built in DSP, ethernet control and reporting
Onboard DSP for signal routing, filtering, ducking, compressor, limiter, etc
