The length of the DG613 has been reduced to make it easier to set up the lasers into tight inverts in the manhole. The DG613 has a grade range from negative 12 percent to positive 40 percent and is fully self-leveling over the entire grade range. Even the cross axis is fully compensated providing quick set up and peace of mind that the laser will be level without having to adjust at the bottom of the invert. Flexible power options provide 40 hours operating time with NiMH rechargeable batteries and 50 hours with alkaline batteries. Alkaline batteries can be used directly in the laser without a separate battery pack. An additional car charger is available for work in remote areas. A large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via a graphical menu which makes it simple and easy to use no secret button pressing and short learning curve means it can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803 remote control.
The DG613G features a bright visible beam with a range up to 430 ft above and 500 ft inside pipes
10 arc second accuracy and a self-leveling range of negative 12 percent to positive 40 percent over the entire grade range
Line centering, line set and line alert functions
Compact length allows easy set-up even in tight inverts
Large, bright, graphical user interface makes the screen easier to see and use when in or out of the pipe, and the same graphical user interface can be seen on the remote what you see on the laser you see on the remote
Cross axis compensation provides a quicker more accurate set-up as the laser does not have to be level in the pipe place it in the pipe, it levels, you work
IP68 protection that is dust and waterproof for outdoor use
RC803 remote works via radio 130 m, 430 ft, or infra-red 150 m, 500 ft, for both over-the-top set-up and in the pipe trench set-up
The DG613G has advanced functions that make setting up and using it easy and accurate
