PC-SuperEpoxy is a non drip translucent paste epoxy with unlimited uses in bonding, sealing, and as a filler for most materials. This paste epoxy was formulated to be extremely versatile, flexible, and resilient with enormous strength. Unlike our other paste epoxies PC-SuperEpoxy is designed to be fast curing. PC-SuperEpoxy has a viscosity similar to Vaseline making overhead and sidewall work easy without drip or sag. Stair installers just love this product for installing iron balusters. PC-SuperEpoxy demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Bonds most everything to anything. In cold or cool temperatures, place PC-SuperEpoxy container near heat prior to using. PC-SuperEpoxy mixes and spreads easier at 80 degree F than at 40 degree F. any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-SuperEpoxy. Denatured alcohol is excellent for smoothing applied PC-SuperEpoxy. Also use denatured alcohol to clean surfaces before applying. Ideal for use as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations, as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks, as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Work time (70 degree F): 15 minutes. Tack free cure time: 45 minutes. Cure for service: 3-4 hours. Maximum cure: 3-7 day. Gardner impact resistance: 160 in./lb. Conduction (electric): non conductive. Excellent thermal shock.
Kit includes epoxy adhesive paste, dispensing gun, and mixing nozzles to bond a range of materials, including wood, metal, glass, brick, concrete, and fiberglass
Translucent epoxy adhesive paste structurally bonds iron and steel to wood and concrete, fiberglass, PVC
Incredibly tough and durable high strength adhesive; works inside or outside, waterproof
Cures in 3 - 4 hours at 70°F 50 ml cartridge with mix nozzle requires dispensing gun
Cures translucent to blend in with bonded material; can be drilled, sanded, sawed, and painted after full cure
Continuous service temperature range from -20 to +200 degrees F
Non toxic once cured
Made in the USA
Color of dispensing gun may vary
