SUGIFT Single Horn Cast Steel Anvil with 50-HRC Heat-Treated Face Over 70-Percent Rebound Unpainted Smooth Round Horn 5.2 x 2.68-in Work Surface and Wide Stable Base Compact Blacksmith Forging Tool for Bending Shaping Riveting and Flattening Metal

50-HRC Heat-Treated Face: Cast steel heat treated at 800 degrees to a 50-HRC surface resists denting and deformation so the face stays flat through repeated hammering and forging strikes

Over 70-Percent Rebound Rate: A rebound rate above 70 percent returns hammer energy to the workpiece for faster more efficient forging with less arm fatigue on each and every strike

Smooth Round Horn Shaping: A round horn bends curves and shapes bar and rod stock while the unpainted working face keeps hot workpieces free of paint contamination during forging

For Smiths and Hobbyists: Beginner and experienced metalsmiths use this compact anvil for riveting flattening bending and shaping small forging and craft projects right at the workbench

Compact Stable Tabletop Base: A 5.2 by 2.68-in work face over a wide flat base keeps the anvil planted and steady during hammering for accurate control in tight tabletop metalworking spaces

Specification: Type: Single Horn Anvil; Material: Cast Steel; Face Hardness: 50 HRC; Rebound: Over 70 Percent; Work Face: 5.2 x 2.68 in / 132 x 68 mm; Surface: Unpainted; Net Weight: 11.1 lb / 5.02 kg; Dimensions: 10.4 x 5.7 x 6.7 in / 26.5 x 14.5 x 17.0 cm