Raindrip 24 GPH Quarter-Circle Drip Irrigation Multi-Dripper Combination Assembly

As part of a complete drip irrigation system, the emitter delivers water gradually; with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source

Spray reaches up to 13 ft radius at 30 PSI; Discharge water from 0 to 24 GPH at 0-30 PSI

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Adjustable Flow Bubbler Assembly is preassembled and ready to install—insert the stake in the ground; connect the attached 1/4-in tubing to larger size supply tubing with the Clamp N Pierce Connector; Periodically check for damage and replace

Adjustable flow bubbler, adjustable riser, 1/4-in Clamp N Pierce inlet, and 13-in stake come preassembled for a quicker install; Fan spray bubbler releases water in a quarter-circle pattern

Discharge rates from 0 to 24 GPH, radius from 0 to 13 ft (at 0-30 PSI); Patented Clamp N Pierce Connector punches a hole into supply tubing and attaches 1/4-in tubing inlet

Adjustable flow bubbler, riser, and 1/4-in tubing made of polyethylene treated with UV inhibitors to prevent fading and cracking; Stake and Clamp N Pierce Connector are made of ABS treated with UV inhibitors to prevent fading and cracking

Comes with one Adjustable Flow Bubbler Assembly which includes a bubbler, riser, 13-in stake, and 1/4-in Clamp N Pierce inlet; Use with 1/4-in, 1/2-in, 5/8-in, or 0.710 in Supply Tubing to transport water to plants