Drip irrigation systems are designed to work with low water pressure. When your water source emits high water pressure, it will be too much pressure for your system to handle. The solution? The pressure regulator does the trick—it lowers the water pressure and alleviates stress on your drip system. No more flying fittings or popping off emitters! The 3/4 in. FPT X 3/4 in. MPT pressure regulator comes preset at 30 PSI. Connects to 3/4 in. MPT pipe on one side (such as an existing underground irrigation system), and 3/4 in. FPT pipe on the other, or connects to tubing with a 3/4 in. FPT adapter (sold separately). The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the pressure regulator connects to a water source and lowers the incoming water pressure so your drip system can work with optimal performance. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Lowers incoming water pressure from a water source for optimal performance of your drip system; Connect to an existing underground irrigation system with a 3/4-in MPT pipe or fitting, or other IPS
Attach to an existing underground irrigation system with a 3/4-in MPT pipe or fitting
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Attach the pressure regulator to an existing underground irrigation system with a 3/4-in MPT connection point; Periodically check for damage and replace as needed
Regulates water pressure from water source; preset at 30 PSI, ideal for most drip irrigation systems; Maintains 30 PSI
Pressure regulator is made of high-impact Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking
Comes with one 3/4-in FPT X 3/4-in MPT Pressure Regulator; Use with a 3/4-in FPT Swivel Adapter to connect supply tubing
Raindrip stands by its product and gives a 1-year, 100% assurance of satisfaction: If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling