Raindrip Pipe Thread Drip Irrigation Pressure Regulator

When you’re connecting your drip irrigation system to a water source, don’t forget the pressure regulator. Without it, the excessive water pressure can blow out emitters and fittings, and damage your system. The pressure regulator lowers the water pressure to a set pressure so your drip system can work effectively—keeping your fittings and emitters in place, right where you need them. The 3/4 in. FPT X 3/4 in. FPT pressure regulator is preset at 30 PSI, and commonly used to connect an existing underground irrigation system with 3/4 in. MPT pipe to control the water pressure. Install with the directional arrow pointing in the direction of water flow. The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the pressure regulator connects to a water source and lowers the incoming water pressure so your drip system can work with optimal performance. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.