Make changes to the water flow rate and spray range easily with the Adjustable Flow Bubbler. Featuring a convenient dial to control the water, simply turn the knob to discharge the amount of water to your preference—from the shutoff position at 0 to 21.6 GPH, and up 62 in. radius at pressures between 15-50 PSI. Water is released in a fan spray, full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Emitter is assembled on a 5 in. stake, and a built-in 1/4 in. barbed inlet connects to 1/4 in. supply tubing. Bubbler is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With non-pressure compensating emitters, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow bubblers are easy to set up in drip systems, and can be used in place of several drippers. Raindrip offers an emitter for every watering need. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
As part of a complete drip irrigation system, the emitter delivers water gradually; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
Spray reaches up to 62-in radius at 15-50 PSI; Discharge water from 0 to 21.6 GPH; recommended operating pressure for most emitters is between 15 to 50 PSI
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Emitter sits on top of the stake, where a 1/4 in barbed inlet connects to 1/4 in supply tubing; position stake in ground so the emitter can evenly water your plant’s root zone; Periodically check for damage and replace as needed
Fan spray bubbler releases water in a full-circle pattern; Increase or decrease water flow by turning the dial
Bubbler comes attached to 5-in stake; built-in 1/4-in barbed inlet connects to 1/4-in supply tubing
Emitter is made of polyethylene treated with UV inhibitors to prevent fading and cracking
Comes with one Adjustable Flow Bubbler on 5-in Stake; Use with 1/4-in Supply Tubing to transport water to plants