Make sure your drip system supply tubing and emitter stay in place with the 1/8 in – 1/4 in. Heavy-Duty Tubing Support Stake. The sturdy stake has built-in notches to hold 1/8 in. to 1/4 in. distribution tubing or an emitter attached to tubing, such as a button dripper, inline dripper, or Take-A-Part™ flag dripper. Use the stake to secure different sized tubing or use tubing to make additional passes around plants. The 6 in. stake keeps the emitter above soil and mulch to prevent clogging and makes it easier to adjust the emitter as needed. Ideal for flower and vegetable gardens, and around trees, shrubs, and container plants. This tubing support stake is made of acrylonitrile butadiene styrene (ABS) with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. Tubing stakes are used to hold down supply tubing and position the attached emitter close to your plant’s root zone. Raindrip offers tubing stakes and clamps in a variety of sizes and shapes to optimize your drip system. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Secures supply tubing where you want them; keeps emitters near the root of plant for optimal growth and health; Ideal for use in flower and vegetable gardens; around trees and shrubs, and container plants
As part of a complete drip irrigation system, the tubing support stake anchors supply tubing in place and helps position emitter near the plant’s root zone, Place 1/8 in to 1/4 in supply tubing into built-in notches and anchor stake into ground
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Layout supply tubing, then anchor tubing down with stakes, periodically check for damage and replace as needed
Stake is 6 in long, Built-in notches accommodate 1/8 in to 1/4 in supply tubing, from 0.185 in to 0.250 in OD
Tubing Support Stake is made of Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking
Comes with ten Heavy-Duty Tubing Support Stakes to be used with 1/8 in to 1/4 in Supply Tubing to transport water to plants