The porous 1/4 in. Soaker Tubing gently seeps water out of the entire line, moistening the soil around plants for complete root zone hydration. Easy to install—attach the tubing to a larger supply line using a 1/4 in. fitting or Clamp N Pierce® connector, and place tubing in the area to be irrigated. The flexible soaker tube is ideal for short runs on flat surfaces such as vegetable gardens and borders, and also great as a watering ring around small plants. With the non-pressure compensating soaker tubing, expect varying water flows based on length of tubing or landscape elevation, with higher flows closer to the water source. The soaker tubing is made of recycled rubber treated with UV inhibitors for durability. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, the soaker tubing evenly waters the root zone of your plants, keeping it moist with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Slowly waters the soil around plants for complete root zone hydration, ideal for short runs on flat surfaces such as vegetable gardens, bordeers, and small plants
Tubing outside diameter (OD) is 0.250 in, internal diameter (ID) is 0.170 in, connects to 1/2 in, 5/8 in, or 0.710 in supply line with 1/4 in micro fitting such as a barbed connector or Clamp N Pierce connector
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Connect to 1/2 in or larger supply line using a 1/4 in micro fitting or Clamp N Pierce® connector, Periodically check for leaks or damage, in cold climate areas, no need to winterize—the soaker tubing can be left in place or covered in soil or mulch
Porous non-pressure compensating material gently seeps water out of the entire line of tubing
Flexible tubing bends to accommodate curved irrigation areas as well as straight runs, Tubing can be cut to desired length
Soaker tubing is made of recycled rubber tires treated with UV inhibitors to prevent fading and cracking
Comes with one 50 ft coil of 1/4 in Soaker Tubing Use with Clamp N Pierce® Connector to connect to main supply line