The Radial JS2 and JS3 are Jensen Transformer equipped mic splitters that allow a balanced source to drive multiple destinations via standard XLR connectors. These passive devices feature a premium nickel laminated core transformer for exceptionally low Harmonic Distortion without the usual phase shift caused by lesser steel core transformers. The undisputed benefit of 100 Percent transformer isolation provides better than -90dB common mode noise rejection ( CMR), thus eliminating troublesome hum and buzz caused by stray voltage and ground loops. These problem-solvers ' offer a simple yet highly effective interface for microphones or direct boxes, and with the addition of the -30dB pad, consumer and line level devices may be employed without distortion or fear of overload due to saturation. The Radial JS2 and JS3 mic splitters feature a rugged 14-gauge steel construction for maximum durability. A unique book-end design creates a protective zone for switches and connectors against the harsh environment of concert touring. An internal welded I-beam skeleton houses the PC board, creating a virtually indestructible monocoque design that makes it impossible to torque the circuitboard. This eliminates stress on the points which can cause cold to develop. This innovative design also has the unique advantage of allowing up to 8 units to be rack-mounted using the Radial J-Rak. The J-Rak is a heavy-duty rack shelf that allows the splitters to span across a vertical array using only two 19-" rack spaces. Features. Microphone Splitter for JS2. 100 Percent isolation to eliminate ground loops. Jensen transformer-equipped for best sound. Microphone or line level signal handling. Compact design - may be J-Rak mounted. Ultra rugged 14-gauge steel construction Specifications. Audio Circuit Type: Passive mic/line splitter, transformer based. Number of Channels: Three-way splitter. Frequency Response: 20Hz - 20KHz ( +0dB/-2dB). Dynamic Range: 140 dB. Maximum Input: +25 dBu 1kHz. Total
The Radial JS2 and JS3 are Jensen Transformer equipped mic splitters that allow a balanced source to drive multiple destinations via standard XLR connectors. These passive devices feature a premium nickel laminated core transformer for exceptionally low
Microphone Splitter for JS2
