Restore or install smooth-operating drawer slides with the Prime-Line R 7211 Drawer Hardware Kit. Designed for most bottom- and side-mounted drawer systems, this complete hardware kit provides a reliable solution for repairing worn drawer tracks or installing replacement drawer slide components. The self-closing design automatically engages during the final 2-1/2 in. of travel, helping drawers close smoothly and securely. Constructed with durable steel tracks featuring a white powder-coated finish and self-lubricating plastic rollers, this drawer slide system is built for dependable everyday performance. When properly installed, the hardware supports loads up to 75 lbs., making it suitable for many household furniture applications. The kit includes all necessary installation fasteners and detailed instructions for a straightforward DIY repair or replacement project. The 17-3/4 in. tracks are designed for 16 in. deep drawer cabinets and require 1/2 in. side clearance, 1/4 in. bottom clearance, and 5/8 in. top clearance. Compare dimensions and clearance requirements with your existing drawer system before purchasing to ensure proper fit.
Ideal Use: Repairs or replaces drawer slide hardware on most bottom- and side-mounted drawer systems for smooth, reliable operation
Dimensions & Compatibility: Includes 17-3/4 inch tracks for 16 inch deep cabinets; requires 1/2 inch side, 1/4 inch bottom, and 5/8 inch top clearances
Key Features: Self-closing mechanism engages during the last 2-1/2 inch of drawer travel and supports up to 75 pounds when properly installed
75 pounds MAXIMUM SAFE LOAD CAPACITY – The maximum safe load capacity for the drawer slide kit is 75 pounds and is for use in 18 inch deep drawers, and it features a positive stop in the closed position and a double stop in the open position, so it doesn't pull too far out and fall off the tracks
Fit Guidance: Designed for compatible bottom- and side-mounted drawer systems; verify track length, dimensions, and required clearances before ordering
SPECIAL NOTE - (Not Universal) Be sure to consider installing part number R 7240 as the back bracket if your drawer does not currently have one, or is damaged