This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare, and is 1-9/16 in. tall. It features a rear adjusting screw with a 1/4-20 threaded mounting hole on the back end. A variety of sliding patio door manufacturers use this roller assembly.
SLIDING DOOR ASSEMBLY – Replace or repair broken or missing sliding door rollers with this adjustable roller assembly (no mounting screws included)
PATIO DOOR ROLLERS – This door roller assembly is used by a variety of metal framed sliding patio door manufacturers
STRONG AND DURABLE – Made of stamped steel housing with a yellow finish, these sliding door rollers are strong, durable, and built to last
DIMENSIONS – The housing of the patio door replacement rollers is 3/4 inch wide with a 27/32 inch flare and 1-9/16 inch tall, with a 1/4-20 threaded mounting hole on the back end; the concave ball bearing steel roller is 1-1/2 inch
EASY TO INSTALL - A Phillips head screwdriver is required for installation; use the screw in the front of the housing to adjust; for further dimensional information, please see the line drawing
