These vintage style door knob rosettes are constructed of stamped steel and come in a chrome plated finish. This type of rosette is designed for indoor use only, and it is used with other vintage style hardware and other classic hardware manufacturers. These rosettes feature an outside diameter of 2-1/4 inch, an inside diameter of 11/16 inch and have a 1-3/4 inch mounting hole center spacing. Note: If attempting to use these rosettes on doors with large, pre-drilled knob holes, the fasteners of these rosettes require a solid surface to mount to. The large 2-1/8 inch (approximate size) pre-bored holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Installation tip #1: Products like Fix-It-All® and Bondo Body Filler® have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Installation tip #2: Apply a small amount of Loctite ThreadLocker 271® to the set screw threads in the event they are loosening – Loctite® purchased separately.
Perfect for replacing old style or antique rosettes
Durable stamped steel construction
Mounting holes are 1-3/4 inch on center
Chrome plated finish
Ideal for old style or antique passage locks
Designed for old style or antique doors that require a spindle and knobs
A Phillips head screwdriver is required for installation
Please refer to the line art drawing for dimensions and compare with your original item before purchasing