Postsaver 4-in x 4-in x 12-ft Black/Green Post sleeve

Ground-line rot, decay, fungi, and moisture are the number one contributor to wood post failures and are found within the first 6-in to 8-in of earth surrounding in-ground posts. Post saver fence post protector sleeves provide a locked-in air and moisture barrier and rot block protection for new wooden posts before installation. Installing this product on your posts will save yourself the cost of replacing your posts every few years. Independently tested and proven to dramatically extend the lifespan of wooden fence and gate posts with a 20 year guaranty. To apply, simply wrap the roll of Postsaver Wrap and Tack around your post ensuring the top 2-in are above required burial depth, as per instructions. Overlap 1-in or 2-in inches to ensure the post is completely covered. Tack with a hammer staple or equivalent to hold secure and heat shrink in place using a heat source such as a soft flame blow torch, it takes less than a minute to apply. Once you've fitted Postsaver protection to your posts, install in the normal way, i.e. dig and back fill, concrete or power drive (even into stony ground).