This Phyfalip two-piece set includes 304 stainless steel fully threaded rods for structural anchoring, assembly, and fastening applications. Each rod has a 3/8-16 thread size and measures 12 inches in length. The rods use UNC-standard threads with 16 threads per inch and a right-hand thread direction, allowing them to be screwed into compatible threaded nuts or tapped holes where the specified thread size and direction match.
The rods are made from 304 stainless steel with good corrosion and rust resistance, good ductility, and low magnetic permeability. Their fully threaded design supports the supplied applications, including structural anchoring and common projects such as anchoring light poles and stop lights. They are also described as suitable for standard and DIY products. For assembly and fastening, screw a rod into a threaded nut or tapped hole, then cut it to the desired length as needed for the project.
The package contains two 3/8-16 fully threaded rods. The supplied product weight is 0.53 pounds, and the listed product dimensions are 12 x 0.25 x 0.25 inches. Package measurements and weight are listed separately: the package dimensions are 12.52 x 2.87 x 0.71 inches, and the package weight is 0.6 pounds. These package measurements describe the packaged set rather than the individual assembled rod. Confirm the 3/8-16 UNC thread size, 16 threads per inch, right-hand thread direction, and required rod length before selecting nuts, tapped holes, or other connection components. When a shorter rod is needed, the supplied instructions indicate that the fully threaded rod can be cut to the desired length for the assembly or fastening task.
This set includes two fully threaded rods with a 3/8-16 thread size and 12-inch length, using UNC-standard threads with 16 threads per inch and a right-hand thread direction
Each fully threaded rod is made of 304 stainless steel, which provides good corrosion and rust resistance along with good ductility and low magnetic permeability
The rods are suitable for structural anchoring and common applications such as anchoring light poles and stop lights, based on the supplied application information
For assembly and fastening, screw the rods into compatible threaded nuts or tapped holes, and cut them to the desired length for standard or DIY products
The package includes two 3/8-16 fully threaded rods, providing a two-piece set for assembly, fastening, structural anchoring, and other supported applications
The listed product dimensions are 12 x 0.25 x 0.25 inches and product weight is 0.53 pounds, while package dimensions are 12.52 x 2.87 x 0.71 inches and package weight is 0.6 pounds
