Protect an inground swimming pool through the winter with this blue polypropylene mesh safety cover, sized 20 x 38 feet to fit rectangular pools measuring 18 x 36 feet. The extra two feet on each side supports a close, tensioned fit when the pool and deck are measured correctly before installation. High density mesh with 0.3 mm openings lets rainwater pass through while helping intercept leaves, pinecones, branches, and other debris measuring 5 mm or larger. A 90 percent shading rate helps limit light exposure and keeps seasonal debris from entering the pool. Double band reinforcement and triple edge locking stitches add support along the cover perimeter, while the woven polypropylene construction remains flexible across temperatures from minus 30 degrees Celsius to 60 degrees Celsius. The included kit contains brass anchor bolts, stainless steel springs, adjustable ropes, and installation tools for hard decks such as concrete or stone. Its tensioned anchor layout is rated for wind speeds up to 30 mph and snow pressure up to 200 pounds. The cover complies with ASTM F1346 and has a static load rating of at least 400 pounds, supporting seasonal pool protection when properly installed and maintained.
The 20 x 38 mesh cover for inground pool fits rectangular pools measuring 18 x 36 feet, providing extra coverage for a taut installation
High strength polypropylene with double band reinforcement and triple edge locking stitches helps resist tearing, with a breaking strength of at least 800 N
The pool safety cover with anchors and springs includes brass anchor bolts, stainless steel springs, adjustable ropes, and installation tools for a ready to install kit
The dense 0.3 mm mesh drains rainwater while helping block leaves, pinecones, and branches measuring 5 mm or larger from entering the pool
ASTM F1346 compliant construction with a static load rating of at least 400 pounds and anchor points rated for 30 mph wind supports seasonal pool protection
