Keep an inground pool covered between swimming seasons with this blue mesh safety cover, sized at 18 x 36 feet for a 16 x 34 foot rectangular pool. The cover extends 2 feet beyond each pool side to support secure coverage when the pool is measured correctly before installation. Woven high strength polypropylene provides a flexible outdoor cover with triple edge locking stitches and reinforced bands rated at at least 800 N breaking strength. The material passed UV1000 anti aging testing and remains flexible across temperatures from minus 30 to 60 degrees Celsius. Fine mesh openings measure 0 point 3 mm, allowing rainwater to drain through while intercepting leaves, pinecones, branches, and other debris measuring 5 mm or larger. A stated 90 percent shading rate helps limit sunlight exposure and seasonal pool maintenance. The kit includes brass anchor bolts, stainless steel tension springs, adjustable ropes, an Allen wrench, an aluminum tamping tool, and a stainless steel installation rod. Hardware suits hard pool decks such as concrete and stone, while the adjustable rope range of 11 to 27 inches supports tensioning around compatible pool structures. The cover complies with ASTM F1346 and has a stated static load capacity of at least 400 pounds.
Sized at 18x36 feet for 16x34 foot rectangular inground pools, the 2 foot overlap on each side supports tight coverage after accurate measurement
Triple stitched pool safety cover construction uses woven polypropylene and reinforced bands rated at least 800 N for flexible outdoor service
ASTM F1346 pool safety cover construction has a stated static load capacity of at least 400 pounds for added coverage over the pool surface
Pool cover with brass anchors and stainless steel springs includes adjustable 11 to 27 inch ropes and tools for compatible concrete or stone decks
0.3mm mesh pool cover for leaves and branches lets rainwater pass through while intercepting debris measuring 5 mm or larger
