Cover an inground swimming pool during the off season with this green polypropylene mesh safety cover, sized 18 x 34 ft to fit pools measuring 16 x 32 ft. The extra 2 ft on each side supports a close, tensioned fit when the pool and deck are measured correctly. High-strength polypropylene weaving, double-band reinforcement, and triple edge-lock stitching help maintain the cover structure through outdoor seasonal changes. The 0.3 mm mesh surface lets rainwater drain through while filtering leaves, pinecones, branches, dust, and other debris measuring 5 mm or larger. A 90 percent shading rate helps limit light exposure while the pool remains covered. The cover is rated to withstand wind speeds up to 30 mph, snow pressure up to 200 lb, and a static load of at least 400 lb under the stated conditions. It complies with ASTM F1346 and includes brass anchor bolts, stainless steel springs, adjustable ropes, and installation tools. The hardware fits hard pool decks such as concrete and stone, with a three-step measurement, drilling, and tensioning process. Measure the pool before installation to confirm the 16 x 32 ft fit.
The 18 x 34 ft pool cover fits 16 x 32 ft inground pools with 2 ft of extra coverage on each side for a close winter fit
High-strength polypropylene mesh with double-band reinforcement and triple edge-lock stitching supports outdoor use across temperatures from minus 30 C to 60 C
A 0.3 mm mesh surface drains rainwater while filtering debris 5 mm and larger, helping reduce leaves and branches in the covered pool
The pool safety cover with installation tools includes brass anchor bolts, stainless steel springs, adjustable ropes, and hardware for concrete or stone decks
ASTM F1346 compliant pool cover construction supports up to 30 mph wind, 200 lb snow pressure, and a stated static load of at least 400 lb
