The footstools harmonic balancer puller is designed for use with model GM 2000, generation II Cadillac (1988 - newer), Chevrolet trucks (2003 - newer), Chrysler (1990), Ford (1995 - newer), and Mitsubishi eclipse (1995). Designed for removing harmonic balancer damper pulleys in tight engine compartments without removing the radiator. It includes 3-jaw puller, 4 lengths of forcing adapter rods, and a forcing screw with a 3/8 inch square drive for ratchet use and a 3/4 inch hex for wrench or socket use. The footstools harmonic balance puller includes unique tensioned jaws for easy tool placement in tight quarters (a feature not offered by other brands). The footstools dampener puller is designed to remove the harmonic balancer from the crank shaft. Special jaws engage the spokes of pressed-on harmonic balancers that do not have threaded holes. To use 1. Lubricate and thread the pressure screw into the puller tool. 2. Using a ratchet remove harmonic balancer’s retainer bolt. 3 Select the appropriate adapter rod. 4. Stick the adapter rod into the center of the harmonic balancer and then put the hollow end of the pressure screw over the adapter rod. 5. Insert the jaws through the spoked areas so they’re gripping the center hub. 6. Hand tighten the pressure screw until it makes contact with the adapter rod. 7. Use a ratchet to turn the pressure screw until the harmonic balancer is pulled.
For pressed-on harmonic balancers: harmonic balancer puller set is designed for pressed-on harmonic balancers with a single center retainer bolt uses 3 puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers
Wide application: harmonic balancer puller designed for use with model GM 2000 generation II Cadillac 1988 - newer, Chevrolet trucks 2003 - newer, Chrysler 1990, Ford 1995 - newer, and Mitsubishi eclipse 1995
Money saver: removing and reinstalling the harmonic balancer is a relatively simple operation and can save you hundreds of dollars if you do it yourself; our tool makes the job even easier by making it possible to do the job without removing your radiator
Instructions and storage case included: our harmonic balancer pulley removal tool comes with easy to follow instructions and a durable blow-molded carrying case
Specifications: includes puller body, 3-jaw puller, (3) jaw retaining pins, (3) wave washers, (4) pressure screw adapter rods (4 inch, 5-13/32 in, 6-1/2 in, and 7-13/32 in)
