NDS 17-in L x 24-in W x 12-in H Rectangular Valve Box

Protect irrigation system components from the elements, foot traffic, lawncare equipment, and potential vandalism, and keep them out of sight

Fits over large-sized valves, control zone kits, and other irrigation equipment; Structural reinforcing ribs provide support and strength to protect items housed inside against damage

Overlapping cover prevents dirt and debris from entering the box; ICV designation; slot on lid for easy lifting with flathead screwdriver; Pipe hole facilitates irrigation pipe connections without having to dig under the box

Build valves and connect pipes; dig to allow enough depth so the lid is flush with the surface; add layer of gravel for drainage before placing box and cover in place, thread irrigation pipe through the hole; backfill

Box made of polypropylene (PP) using a 100% recycled content; Lid made of high-density polyethylene (HDPE) using a combination of virgin and recycled content; Both treated with UV inhibitors to prevent fading and cracking

Box top inside dimension (ID) 13-3/8 inch X 19-15/16 inch; Top outside dimension (OD) 14-7/8 inch X 21-3/8 inch; Box bottom ID 18 inch X 24-3/4 inch; Box bottom OD 19 inch X 25-3/4 inch

Box height is 12 inch; Box pipe hole dimensions are 3 inch X 4 inch

Lid top dimension 14-7/8 inch X 21-1/2 inch; Lid bottom dimension 13-1/16 inch X 19-5/8 inch; rim thickness 1/4 inch; overall height 2-3/8 inch

Comes with one 13 inch X 20 inch rectangular valve box and cover